Installation

IMPORTANT

It is essential that the lower cupboard is constructed in the manner illustrated i.e. having side, back, and roof panels so joined as to provide no apertures which could permit access to the oven unit when installed.

1. GENERAL

The appliance is designed for mounting at a safe level into an oven housing which must be secured to the backing wall.

2.VENTILATION

a.The oven housing unit cabinet dimensions must comply with fig. 4.

b.An air gap of 50mm minimum must be provided at the rear of any top or bottom cupboards or shelves (see fig. 1).

c.It is necessary that the cabinets are provided with unobstructed ventilation, i.e. from adjacent cabinetry. This can be done by either raising the base of the cabinets using the adjusting feet (or spacers) or alternatively by providing a slot in the cabinet plinth to the dimensions in fig. 1.

d.The air gap at rear allows the warmed air to pass out of the inner cabinet space. Where it is intended to fit cupboards above the oven unit to ceiling height, it is essential that the warmed air is exhausted through the front of the cabinet (see fig. 1).

e.If an oven unit is installed adjacent to a tall cabinet, steam escaping from the oven when the door is opened could condense on and maybe stain the adjacent surface. To prevent permanent staining, the adjacent surface should be made of a material that is heat resisting and easy to clean. Adjacent tall cabinets should not be deeper than the oven housing cabinet.

3.FINAL INSTALLATION

a.Using a spirit level, check that the housing cabinet is level from side to side and from front to back in its installed position.

b.Correct any unevenness by placing spacers under the bottom of the cabinet. Make sure that the cabinet rests firmly on the floor without rocking.

c.Before the oven is fitted, the cabinet must be firmly secured to the backing wall for stability.

d.The oven unit should now be lifted (this is a two person lift) into the cabinet and pushed fully home.

e.Finally, the oven is secured to the cabinet by means of the four Pozi Wash Head screws - two through each side trim.

f.Remove all packaging material from the grill and oven interior.

LIST OF LOOSE ITEMS

4 x Pozi Wash Head No. 6 x 15mm screws.

26

Page 26
Image 26
Creda D130E manual General, Ventilation, Final Installation, List of Loose Items, Pozi Wash Head No x 15mm screws

D130E specifications

The Creda D130E is a high-performance electric dryer that has gained recognition for its efficiency, versatility, and user-friendly features. This appliance is designed to cater to the demands of modern households, ensuring that laundry is handled with ease and effectiveness.

One of the standout features of the Creda D130E is its impressive load capacity. It can accommodate a significant volume of laundry, making it suitable for families or individuals who frequently wash large items such as bedding and towels. This capacity not only enhances convenience but also reduces the need to run multiple drying cycles, which can save both time and energy.

In terms of drying technologies, the Creda D130E employs a vented drying system. This type of system effectively expels moisture from wet clothes, ensuring that laundry comes out perfectly dry every time. The vented design also contributes to faster drying times when compared to other dryer types, which is an essential factor for users looking for efficiency.

The Creda D130E is equipped with multiple drying programs, allowing users to select the appropriate setting based on their laundry type. These options include various heat levels and drying times, catering to everything from delicate fabrics to more robust materials. Such versatility ensures that garments are treated gently while still achieving optimal drying results.

In addition to its practical features, the design of the Creda D130E emphasizes user comfort. The intuitive control panel is easy to navigate, with clear settings and indicators that guide users through the drying process. This makes the appliance accessible even for those who may not be technologically inclined.

Energy efficiency is another hallmark of the Creda D130E. It has received favorable energy ratings, positioning it as an environmentally friendly option in the dryer market. By utilizing less energy while delivering effective drying results, users can enjoy reduced electricity bills and a lower carbon footprint.

Safety features are also integrated into the Creda D130E, providing peace of mind during operation. An automatic shut-off function prevents overheating, while a filter monitoring system alerts users when the lint tray needs to be cleaned, ensuring optimal performance and reducing fire risks.

In summary, the Creda D130E is an exemplary electric dryer that blends functionality, efficiency, and safety. Its robust load capacity, advanced drying technologies, multiple drying programs, user-friendly interface, and energy-efficient design make it an excellent choice for any household. Whether you have a busy family or simply require a reliable drying solution, the Creda D130E stands out as a reliable option that caters to various laundry needs.