Creda H250E manual Cooking programme to start

Clock & Automatic Oven Timer Operation

b) TO SET THE TIMER TO SWITCH THE OVEN(S) ON AND OFF AUTOMATICALLY

1112 1

102

50

3

40	30	20
8		4

75

6

A

B

Step 1 Check that the correct time of day is set, if not follow instructions for setting the time of day.

Step 2 Place food onto the correct shelf position in the oven and close the oven door(s).

Step 3 Turn the upper knob (A) (without pulling), clockwise, until the symbol appears in the display window.

This allows the auto function to be set.

1112 1

102

50

3

40	30	20
8		4

75

6

AStep 4 Set the orange finger to the "Start" time by pulling the upper knob

(A) and turning it clockwise. e.g. 5 o'clock (as shown).

B

Note: The "Start Time" is the time of day you want the Auto

Cooking programme to start.

1112 1

102

50		3
120
40	30	20
8		4

75

6

A

B

Step 4 Set the "Cook Period" by turning (without pulling) the upper knob

(A)clockwise, until the required cook period in minutes is indicated in the display window.

e.g. 120 minutes (as shown).

Note: The "Cook Period" is the length of time that you wish the food to cook, and it can be set for up to 180 minutes.

Step 5 Turn the oven control(s) to the required temperature, and if necessary select the appropriate oven function.

Note: If an “Auto Cooking Programme” has been set the oven(s) will ONLY operate during the pre-programmed times.

1112 1

102

50 10

3

40	30	20
8		4

75

6

A

B

At the end of the Auto Cook Period the oven(s) will switch off and a bell will ring for approximately 4 minutes.

Step 6 Return the oven controls to the OFF position.

Step 7 To cancel the Bell and return the timer to "Manual Operation", turn (without pulling), upper knob (A) clockwise, until the symbol is shown in the display window.

19