Something Wrong?

Before calling a Service Engineer, please check through the following lists.

THERE MAY BE NOTHING WRONG.

 

 

Problem

Check

 

 

Nothing works.

(a) Check

 

If you find :-

 

Display is blank.

 

Then it is likely that there is no electricity supply to your oven.

 

Check: (i) That the main cooker wall switch is turned on.

 

(ii) Check other appliances to see if you have a power cut.

 

(iii) Check the main circuit breaker for the property.

 

(iv) With oven selected, the oven light does not illuminate.

 

 

Display shows 0.00 AUTO.

The power supply to your oven has possibly been interrupted, but has

 

now come back on again. Reset the timer to the correct time of day

 

and "Manual" operation using instructions given in the timer section

 

of the book.

 

 

Fan oven does not work but the

Check to ensure that the timer is in Manual Mode:

grill works.

See timer section for instructions on how to return timer to

 

 

"Manual".

 

 

Fan Oven and Grill do not work.

Operating the cooker under the following conditions may cause a

 

safety device to operate.

 

(a) Grilling with the door closed - always grill with the door open to

 

the correct position - see grilling.

 

(b) Grilling for an excessively long period at maximum setting -

 

see grilling guide.

 

(c) Grilling with inadequate ventilation in the cabinet - see

 

installation instructions.

 

 

Grill does not work.

Check that you have selected :- "Grill" function on the "Fan oven/Grill

 

Select" knob (A) and a Grill setting on the Grill Knob (B) - see grilling

 

page.

Grill keeps turning on and off.

When the Grill control (B) is operating at less than "6", the grill will

 

cycle on and off, this is normal and is not a fault.

 

 

Can not set an “Auto Cook”

Remember: "Cook Period" is the actual length of time for which, the

programme

timer will switch the oven on as part of an "Auto Cooking"

 

programme.

Draught from beneath control

A gentle flow of air will be blown from beneath the control panel

panel.

when the appliance is used. If the appliance is still warm, this cooling

 

fan may run on, or restart itself after all of the controls have been

 

turned off.

 

The fan will stop once the appliance has been cooled. This is normal

 

and not a fault.

 

 

Timer buzzer/bleeper operates

Buzzer/Bleeper should stop automatically after a short time.

continually

If not, press minute minder button to silence.

 

 

If you have been through the above list and there is still a problem; You should identify your Service

Agent using the list on the back page and contact your Local Service Office.

35

Page 35
Image 35
Creda E010E, R010E manual Something Wrong?, Problem Check

E010E, R010E specifications

The Creda R010E and E010E are advanced electric heating solutions designed to provide efficient warmth and convenience for homes and commercial spaces. These units stand out due to their modern design, user-friendly features, and energy-saving technologies, making them ideal choices for individuals looking to optimize their indoor climate.

One of the main features of the Creda R010E and E010E is the advanced heating element, which ensures rapid warmth while maintaining low energy consumption. This efficiency is largely due to the incorporation of ceramic technology, which allows the units to store heat and release it gradually even after they have been turned off. This feature not only enhances comfort but also reduces energy bills, making them economically viable choices over traditional heating methods.

Both models are equipped with a precise electronic thermostat that ensures consistent and accurate temperature control. Users can easily set their desired comfort levels, and the heating units will intelligently adjust their output to maintain those temperatures. This sophisticated temperature management is complemented by programmable timers, enabling users to schedule heating times according to their needs, ensuring warmth is available when needed while avoiding unnecessary energy use.

The design of the Creda R010E and E010E reflects modern aesthetics, featuring sleek lines and a compact profile that allows for flexible placement in various settings. The lightweight construction means they can be easily mounted on walls, freeing up floor space while integrating seamlessly into any room’s décor.

Safety is also a critical consideration in the design of these units. Both models come with built-in overheat protection, ensuring that the heaters automatically switch off if they reach unsafe temperatures. Additionally, the sturdy build quality and high-grade materials enhance their durability, ensuring reliable performance over years of use.

Finally, the Creda R010E and E010E are also easy to maintain, with features designed to minimize dust and dirt buildup. Users can easily clean the external surfaces, ensuring optimal hygiene and a healthy living environment. With these technologies and characteristics, the Creda R010E and E010E represent some of the leading options for electric heating solutions in today's market, combining efficiency, safety, and modern aesthetics.