Manuals / Creda / Kitchen Appliance / Oven

Creda E430E, R430E, N230E manual General, Ventilation, Final Installation, List of loose items

Models: N230E E430E R430E

1 40
Download 40 pages 57.06 Kb
Page 34
Image 34

Installation

Important

It is essential that the lower cupboard is constructed in the manner illustrated i.e. having side, back, and roof panels so joined as to provide no apertures which could permit access to the oven unit when installed.

1. General

The appliance is designed for mounting at a safe level into an oven housing which must be secured to the backing wall.

2.Ventilation

a.The oven housing unit cabinet dimensions must comply with fig. 4.

b.An air gap of 50mm minimum must be provided at the rear of any top or bottom cupboards or shelves (see fig. 1).

c.It is necessary that the cabinets are provided with unobstructed ventilation, i.e. from adjacent cabinetry. This can be done by either raising the base of the cabinets using the adjusting feet (or spacers) or alternatively by providing a slot in the cabinet plinth to the dimensions in fig. 1.

d.The air gap at rear allows the warmed air to pass out of the inner cabinet space. Where it is intended to fit cupboards above the oven unit to ceiling height, it is essential that the warmed air is exhausted through the front of the cabinet (see fig. 1).

e.If an oven unit is installed adjacent to a tall cabinet, steam escaping from the oven when the door is opened could condense on and maybe stain the adjacent surface. To prevent permanent staining, the adjacent surface should be made of a material that is heat resisting and easy to clean. Adjacent tall cabinets should not be deeper than the oven housing cabinet.

3.Final Installation

a.Using a spirit level, check that the housing cabinet is level from side to side and from front to back in its installed position.

b.Correct any unevenness by placing spacers under the bottom of the cabinet. Make sure that the cabinet rests firmly on the floor without rocking.

c.Before the oven is fitted, the cabinet must be firmly secured to the backing wall for stability.

d.The oven unit should now be lifted (this is a two person lift) into the cabinet and pushed fully home.

e.Finally, the oven is secured to the cabinet by means of the four Pozi Wash Head screws - two through each side trim.

f.Remove all packaging material from the grill and oven interior.

List of loose items:

4 x Pozi Wash Head No. 6 x 15mm screws.

34

Page 33 Page 35
Page 34
Image 34
Creda E430E, R430E, N230E General, Ventilation, Final Installation, List of loose items, Pozi Wash Head No x 15mm screws
Page 33 Page 35

N230E, E430E, R430E specifications

The Creda R430E, E430E, and N230E models represent a significant advancement in the realm of electric heating appliances, combining efficiency, user-friendliness, and modern aesthetics. These models are tailored to meet a variety of heating needs, making them suitable for both residential and light commercial applications.

One of the standout features of the Creda R430E, E430E, and N230E is their energy efficiency. These models are designed with advanced heating technologies that minimize energy consumption while maximizing heat output. This not only leads to lower energy bills for the user but also contributes to an environmentally friendly heating solution.

Each model is equipped with a built-in thermostat, allowing users to set their desired temperature with precision. This feature enhances user comfort, ensuring that spaces are heated to the desired levels without unnecessary energy waste. Additionally, these appliances incorporate programmable timers, enabling users to schedule heating in advance, further promoting energy efficiency and user convenience.

The Creda R430E, in particular, is known for its robust build quality and durability. Its design incorporates safety features such as overheat protection and a sturdy casing, ensuring that the unit remains safe to operate, even in busy environments. The E430E and N230E models also share this emphasis on safety, making them reliable choices for homes and other settings.

Another noteworthy characteristic of these models is their whisper-quiet operation. Unlike traditional heating systems, the Creda appliances operate silently, making them ideal for bedrooms, offices, and other quiet spaces. This attribute enhances the overall user experience, as there is no distracting noise associated with heating.

In terms of aesthetics, both the R430E and E430E models boast a sleek and modern design that effortlessly blends into any décor. Their compact size allows for flexible installation options, whether mounted on a wall or placed on the floor, ensuring that users can optimize their space.

Overall, the Creda R430E, E430E, and N230E models showcase a perfect balance of performance, safety, and aesthetic appeal. They represent a solid investment for individuals seeking reliable and efficient heating solutions, making them a preferred choice among homeowners and businesses alike.