Introduction

Installation Instructions

We hope that the following information will help you to familiarise yourself with the features of the appliance, and to use it successfully and safely.

Our policy is one of constant development and improvement. Strict accuracy of illustrations and specifications is not guaranteed. Modification to design and materials may be necessary subsequent to publication.

This appliance must be installed in accordance with the regulations in force and only in a well ventilated space. Read the instructions before using or installing this appliance.

Your 1st Year Guarantee

To fulfil the conditions of your guarantee, this appliance must be correctly installed and operated, in accordance with these instructions, and only be used for normal domestic purposes.

Please note that the guarantee, and Service availability, only apply to the UK and Republic of Ireland.

Gas & Electrical connection

Please refer to installation instructions for the Gas & Electrical Safety Regulations and the Ventilation Requirements.

In your own interest, and that of safety, it is the law that all gas appliances be installed by a competent person who will ensure that the installation is in accordance with “The Gas Safety (Installation & Use) Regulations 1994”, & the “The Gas Safety (Installation & Use) (Amendment) Regulations 1996”. Failure to comply with these Regulations is a criminal offence.

Corgi registered installers undertake to work to satisfactory standards.

Disconnection of gas and electric appliances should always be carried out by competent persons.

Warning: This appliance must be earthed.

In the event of a power cut

1.Switch off the electricity to the appliance at the socket.

2.When the power returns, see the ‘Programmer / Clock’ section to ‘Set the time of day’.

The Gas Consumer Council (GCC) is an independent organisation which protects the interests of gas users. If you need advice, you will find the telephone number in your local telephone directory under Gas.

Step 5: Commissioning

Pressure test point

Use the oven burner. From inside the oven remove the burner cowl. Remove the small screw at the LHS of the burner cradle. Slide the burner to the left to access the injector.

Connect suitable T-piece (incorporating a 1.25mm injector) to the injector. Connect manometer to the T-piece, and turn oven control to full on to check pressure.

Replace in reverse order.

Burner aeration

All burners have fixed aeration and no adjustment is possible.

Pressure setting

Cat I2H G20 Natural Gas @ - 20mbar

Electrical systems check

In the event of an electrical fault the preliminary electrical system check (earth continuity, short circuit, polarity and resistance to earth) must be carried out.

Oven

1.Push in and turn the control knob anticlockwise to gas mark 9.

2.Adjust to the required setting.

3.The burner may not come on to a full rate unless the oven door is closed.

The oven burner operates at a low rate for up to 60 seconds until the flame supervision device opens and full gas rate is obtained.

Grill

1.The door must be open for the grill burner to ignite.

2.Push in and turn the control knob clockwise to the grill symbol.

3.Close the door, and check that the burner goes out.

The grill burner will re-ignite when the door is opened again.

Before leaving the installation

Show the customer how to ignite the oven and grill and give them this handbook. Thank you.

2

27

Page 4
Image 4
Creda SO11GW, SO11GB manual Introduction Installation Instructions

SO11GB, SO11GW specifications

The Creda SO11GW and SO11GB are two compact and efficient electric storage heaters designed to provide warmth and comfort in residential and commercial spaces. Both models showcase modern technology and user-friendly features that make them a popular choice for those looking to optimize their heating solutions.

One of the standout features of the Creda SO11GW and SO11GB is their advanced thermal storage system. These heaters store heat during off-peak electricity hours, making them cost-effective and energy-efficient. By utilizing lower energy tariffs, users can significantly reduce their heating bills, particularly during colder months when heating demands rise.

The Creda SO11GW, with its white finish, is designed to seamlessly blend into various interior styles, while the SO11GB, in a graphite finish, offers a sleek, contemporary alternative. Both models are compact in design, allowing for easy installation in small spaces, such as apartments or rooms where floor area is a consideration.

In terms of control and functionality, these heaters are equipped with an electronic timer and programmable controls. This technology allows users to set specific heating schedules, ensuring the space is warm when needed without unnecessary heat loss. The intuitive interface makes it easy to adjust settings and monitor energy usage, promoting user engagement with their heating solution.

Another essential characteristic of the Creda SO11GW and SO11GB is the built-in safety features. These models incorporate overheat protection and a thermal cut-out mechanism to prevent overheating, providing peace of mind for users. The heaters also feature an insulated body, ensuring that surfaces do not become dangerously hot to the touch, which is particularly important in homes with children or pets.

The heaters also come with a robust and durable construction, designed to withstand the rigors of daily use. With their long-lasting ceramic bricks, which retain and release heat evenly, the Creda SO11GW and SO11GB ensure consistent warmth throughout the heating period.

In summary, the Creda SO11GW and SO11GB are efficient, stylish electric storage heaters that combine modern aesthetics with practical technology. Their ability to deliver controlled and cost-effective heating makes them an attractive option for anyone seeking reliable warmth in their living spaces. With advanced features, user-friendly controls, and enhanced safety mechanisms, these models are well-suited to meet the diverse heating needs of today's consumers.