FP089-01 Creda Gas Hob (W810) 12/09/2001 5:02 pm Page 12

INSTALLATION

SITING THE HOB

The hob is designed to fit into worktop and base unit(s) with a cutout as shown in Fig.1. Any obstruction such as supports or side panels must be removed to allow 30mm minimum depth below the worktop cutout. Any overhead surface of combustible material must not be closer than 600mm. When installing next to a tall cupboard, partition or wall, for a minimum distance of 400mm above the hotplate a side clearance of at least 40mm should be allowed from the edge of the cutout. This is a type X appliance regarding installation requirements, it is recommended that a shelf is fitted to the cabinet under the hob, but no closer than 10mm to prevent access to the underside of the hob which will become hot when in use.

If a cooker hood is to be installed refer to the manufacturer’s instructions regarding fixing heights.

FITTING THE HOB

Unpack the hob from the carton.

Remove the bag containing the sealing tape, fixing brackets, screws and gas inlet elbow.

Fit the sealing tape around the edge of the cut-out in the worktop.

Connect the gas inlet elbow supplied to the end of the hob gas pipe. During installation, it is important not to twist the hob gas pipe when connecting to or adjusting the position of the gas inlet elbow to avoid the possibility of disturbing gas tight joints inside the hob. Ensure that the inlet is held securely:

*When loosening or tightening the hob gas pipe securing nut.

*When connecting fittings to it.

Also, ensure that connecting pipe work does not twist the inlet elbow away from its free position.

Lower the hob into the worktop ensuring the mains lead is fed into the base unit and is not trapped under the flanges.

Fix the hob to the worktop using the fixing brackets and screws.

NB Do not over tighten the hob clamps as distortion of the hob may occur. Connect the hob to the gas supply and check for gas soundness. If a flexible hose is used for connection, it should be fitted such that it cannot come into contact with moveable parts of the housing (e.g. a drawer), does not pass through a space where it is likely to become trapped or damaged and hangs freely downwards. The tem- perature rise of the area of the base panel likely to come into contact with a flexible hose does not exceed 70ºC

Connection must be by rigid pipework when the hob is installed above an oven. Put the burner rings and caps into position.

Connect the hob to the electrical supply (see INSTALLATION - Electrical Requirements).

Ensure that the hob is functioning correctly prior to use. Instruct the user in the operation of the hob.

12

Page 11 Page 13
Page 12
Image 12
Creda W810 manual Installation, Siting the HOB, Fitting the HOB
Page 11 Page 13

W810 specifications

The Creda W810 is a highly-regarded washing machine known for its practical features and user-friendly design. With a blend of efficiency and performance, it caters to households looking for reliable laundry solutions. Engineered for durability, the W810 combines modern technology with user convenience.

One of the key features of the Creda W810 is its generous wash capacity, accommodating up to 8 kg of laundry. This allows families to complete substantial loads in a single wash cycle, saving time and energy. Despite its capacity, the machine maintains a compact design, making it suitable for various living spaces without compromising on performance.

The W810 is equipped with an array of wash programs tailored to different fabric types and laundry needs. From cotton to delicate fabrics, the machine provides specialized cycles that optimize washing conditions, ensuring clothes are cleaned effectively while minimizing the risk of damage. Additional quick wash options cater to users in a hurry, allowing small loads to be washed in under 30 minutes.

Energy efficiency is another hallmark of the Creda W810. It boasts an impressive energy rating, which means it consumes less electricity compared to older models. This not only contributes to lower utility bills but also supports environmentally friendly practices, making it a responsible choice for eco-conscious consumers.

In terms of technology, the W810 features a user-friendly digital display that makes it easy to select programs and monitor cycle progress. The intuitive controls enhance the user experience, enabling individuals to customize their washing needs with ease. Additionally, the machine is designed with noise reduction technology, ensuring quieter operation and enhanced comfort during use, especially in open living areas.

Durability and construction are other significant characteristics of the Creda W810. It is built with high-quality materials that ensure longevity, coupled with robust engineering that stands up to frequent use. The drum is designed to provide gentle yet effective agitation, safeguarding the fabric quality of garments.

Overall, the Creda W810 represents a thoughtful combination of functionality, efficiency, and convenience. Its array of features and advanced technologies make it a popular choice for modern households, providing reliable washing solutions that cater to diverse laundry needs while maintaining a focus on energy efficiency and user satisfaction.
Top Page Image Contents