CARE AND CLEANING
SWITCH OFF THE ELECTRICITY SUPPLY BEFORE CLEANING.
BEFORE SWITCHING ON AGAIN, ENSURE THAT ALL
CONTROLS ARE IN THE OFF POSITION.
NEVER USE BIOLOGICAL WASHING POWDER, HARSH
ABRASIVES, SCOURING PADS, AEROSOL CLEANERS OR
OVEN CHEMICAL CLEANERS OF ANY KIND.
Clean the hob regularly and wipe up spills soon after they occur to prevent them from becoming burnt on.
CLEANING MATERIALS TO AVOID
1.Household abrasive powders, e.g. Vim.
2.Oven chemical cleaners, aerosols and oven pads.
Caustic cleaners such as these will etch the surface and attack the metal frame.
3.Bath and sink cleaners may mark the surface.
VITREOUS ENAMEL HOB, PAN SUPPORTS AND BURNER CAPS.
Wipe with a cloth wrung out in hot soapy water. Stubborn stains can be removed with a cream paste or liquid cleaner.
STAINLESS STEEL.
Wipe with a cloth wrung out in hot soapy water followed by a wipe with a cloth wrung out in clear water and then dried with a soft clean cloth.
ALUMINIUM BURNER BODIES AND RINGS.
Wipe with a cloth wrung out in hot soapy water only; do not use abrasives. Use a nylon brush to remove any cleaning materials, water or dirt from the burner bodies.
CONTROL KNOBS.
Wipe over the knobs with a soft cloth wrung out in hot soapy water or mild
Never use scouring pads or abrasive cleaners/powders which may scratch the surface.
BURNER ASSEMBLY
7
