Creda W810 manual Using The Gas Hob - Features, Operation When Using The Gas Hob

Models: W810

1 16
Download 16 pages 9.74 Kb
Page 6
Image 6
USING THE GAS HOB - FEATURES

FP089-01 Creda Gas Hob (W810) 12/09/2001 5:02 pm Page 6

USING THE GAS HOB - FEATURES

In order to obtain maximum performance from the burners, use pans with the following diameters:

Rapid burner

22 - 28 cm

Standard burner

14 - 22 cm

Auxillary burner

10 - 14 cm

All pans should be positioned centrally over the burners.

DO NOT allow young children near to the appliance when the hob is in use as the surfaces get extremely hot.

OPERATION WHEN USING THE GAS HOB

Step 1 Check that the electricity is switched ON.

Step 2 Press the ignition button and then push and turn the control knob of the chosen burner anticlockwise to the large flame symbol. The gas should then ignite.

Step 3 Turn the control knob anticlockwise to the desired setting. Only turn the control knob between the large flame symbol and the small flame symbol when adjusting the setting.

Step 4 Place the pan centrally on the required burner. Step 5 To switch off, turn the control knob fully clockwise.

6

Page 6
Image 6
Creda W810 manual Using The Gas Hob - Features, Operation When Using The Gas Hob