Destiny Stereo Power Amplifier
Operating
Instructions
Thank you for purchasing the Destiny Stereo Power Amplifier. You are now in possession of a State of the Art power amplifier. The function and operation of the Destiny Power Amplifier is very simple. However, the following notes are provided to explain all aspects of its design and use.
Mains Connection
After unpacking the amplifier please keep the packing material in a safe place for possible future use. In the pack there is a separate mains cable suitable for connecting to the mains supply in the country of use. The IEC socket end of the cable should be firmly inserted into the connector on the rear panel marked "Mains Input". Remember, do not overload the mains wall socket with too many plugs or adaptors. The high quality performance of the amplifier will be impaired if the electrical supply to it is in poor condition. If in doubt, consult a qualified electrician or your dealer.
The "Mains Input" connection is also fitted with two fuses, specifically suited to the supply voltage of the country of use. The correct value is clearly marked on the rear panel next to the Mains Input. Should it be necessary to replace the fuse, ensure that you use the same type as specified on the rear panel, i.e. 5 x 20mm cartridge type:
T 3.15 A surge resisting for 220-240V 50Hz AC,
T 6.3 A surge resisting for 110-120V 60Hz AC
T 8A surge resisting for 100V (Japan)
Power Consumption
It is appreciated by
We recommend that if the equipment is not being used for an extended period of time, switch it off from the mains switch on the rear panel. Normal performance can be achieved in a short period of time.
Set-up
To obtain the best results, make sure that the Destiny Stereo Power Amplifier is placed on a stable shelf or
Operating the Destiny Stereo Power Amplifier (Quick
Connect an input signal from a
All these settings will be remembered by the Destiny Stereo Power amplifier the next time you switch it on.
1