Creek Audio STVG-989 instruction manual Tv/Vcr

TROUBLE SHOOTING GUIDE

PROBLEM	POSSIBLE CAUSE	SOLUTION
	Source Selection on TV or	Follow directions on page E7 for
	VCR is not correct.	“Making the Connections”.
No sound - If audio is
connected to TV or		Ensure white and red patch cords
VCR.
	Patch cords are not	are securely inserted into both
	connected securely.	The Singing Machine and the
		TV/VCR.
	Video cable is not connected	Connect the video cable to the
	properly to the TV.	Singing Machine’s VIDEO OUT
		and to the TV VIDEO IN.
	Source selector on TV is not	Using your TV remote to select
	set to VIDEO.	VIDEO input.
		Connect from VIDEO OUT of the
		system to the VIDEO IN of your
		VCR or connect to an RF
	TV does not have video line	Modulator and then to the TV
	input.	cable input. Refer to “Making the
		Connections” on page E7.
		Check the disc to be sure it is a
No song lyrics appear		CDG. (See page E20 for details.)
on screen.	A CDG is loaded but the	Check disc to be sure it is clean.
		(See page E15 for cleaning
	CDG indicator is not lit.
		instructions.)
		Use your TV remote to select
	Source selector on TV is not	VIDEO input. (Refer to page E8
	set to VIDEO.	under Common ways to configure
		your TV or VCR)
		Use your TV remote to select the
		proper VIDEO input or select the
	Source selector on TV is not	proper VIDEO input on the TV
	set to VIDEO.	itself. (Refer to page E8 under
		Common ways to configure your
		TV or VCR)
	Camera has not warmed up.	Wait a minute for the camera to
		warm up.
Image is blurry.	Camera lens is dirty.	Clean the camera lens.
		Adjust the lens of the camera by
	Camera lens is out of focus.	slightly rotating either left or right
		until the display is clear. Do not
		overturn the lens.

17