Creek Audio manual OPERATING THE T50, Manual and Pre-Settuner operation, Tuning, Pre-sets

OPERATING THE T50

Manual and Pre-Set tuner operation

The large control knob on the right side of the panel has two functions.
First, it will manually tune the radio up and down smoothly to receive
stations on FM or AM displaying the frequency, band, centre tuning,
and	Tuning

M E M O RY

MW LW

FM A M

RDS station name, if transmitted

M E M O RY

MW LW

FM A M

TIMER

STEREO

kHz MHz

TIMER

STEREO

kHz MHz

Pre-sets

The second function is to select Pre-Set stations from the tuner’s memory, acting like a rotary switch.

Tuning

M E M O RY

MW LW FM A M

TIMER

STEREO

kHz MHz

Pre-sets

The frequency of the station will be displayed for a few seconds and may be replaced with the station ID. The Pre-Set channel will only show when the tuner is in Pre-Set mode, selected by the MODE button (which toggles between the two functions).

The T50 will remember the last tuned frequency, station ID or pre-set after switching off, so it can be restored when switching back on.

NB. The last tuned station will only be remembered if it has been left unaltered for 1 minute before switching off..

4