Crestron ST-TUNE Integrated AM/FM/TV Tuner

Operations Guide - DOC. 5833A Integrated AM/FM/TV Tuner: ST-TUNE •• 15
The next four sections describe a ST-TUNE within a SIMPL Windows program. The
first section provides initial configuration information, the second section details the
SIMPL symbol, the third section describes how a basic example program works by
using a textual description and a block diagram, and the fourth section describes the
screens of an advanced example program.
NOTE: The following descriptions assume that the reader has knowledge of SIMPL
Windows. If not, refer to the extensive help information provided with the software.
NOTE: VT Pro-e (version 2.1.8 or later) is required for the ST-TUNE example
touchpanels. The latest software version can be obtained from the What’s New page
(VisionTools Pro-e section) or Downloads page (VTPRO-E Library) of Crestron’s
website (www.crestron.com). New users are required to register in order to obtain
access to the FTP site.
NOTE: There is no need to recreate the ST-TUNE example touchpanels or example
SIMPL Windows programs. Both are available from the Downloads page
(EXAMPLES Library) of Crestron’s website (www.crestron.com). Search for
STTUNEA.ZIP that contains a basic example and STTUNEB.ZIP that contains an
advanced example. Each example contains the program and all associated files
required to complete the program.

Configure ST-TUNE Program

To create a program with a ST-TUNE, in the Configuration Manager of SIMPL
Windows, refer to the table below for initial configuration information.
Configure ST-TUNE Program
DEVICE
SYMBOL
DROP
ADDITIONAL
LIBRARY REQUIRED WHERE SETUP
Control
Systems Desired control
system System Views Refer to the documentation
supplied with the control system
for additional setup information.
ST-TUNE or
STI-TUNE
Network
Control
Modules
System Views,
Cresnet Units CHANGE NET ID (OPTIONAL) -
Double-click on ST/I-TUNE (or
single-click then right mouse-
click) on ST/I-TUNE. Select
Configure. Select NET ID then
select desired hexidecimal ID.

ST-TUNE and STI-TUNE Symbols

The diagrams on the next two pages show the ST-TUNE and STI-TUNE symbols in
SIMPL Windows. The two tables following the diagrams list the inputs and outputs,
respectively, and their functional descriptions.
NOTE: The US version ST-TUNE and international version STI-TUNE have the
same default NET ID. If both ST-TINE and STI-TUNE are used in the same Cresnet
system, refer to “Identity Code” that begins on page 10 for further information.
NOTE: All signals listed in the following tables apply to the US version ST-TUNE
and international version STI-TUNE except where noted.