Crestron electronic CLS-C6RF Series specifications Front View

Crestron CLS-C6RF Series ilux™ Integrated Lighting System w/infiNET™

Note: Additional CNPWS-75 or other Cresnet power supply required beyond 4 devices; C2N-SDC-DC always requires an additional power supply

HOT: (1) Captive screw terminal, line input from 15A or 20A feed

LOAD1 – LOAD6: (6) Captive screw terminals, dimmer channel outputs 1 – 6

NEUTRAL: (1) Captive screw terminal

GROUND: (1) Captive screw terminal

PC (front): (1) 3.5mm TRS mini-phone jack, RS-232 Programming port

Controls

Buttons 1 – 6: (6) 3-position rocker pushbuttons; configurable to recall (or toggle recall/off) individual scenes, control shades, or for master lighting or shade control; “scene mastering” option enables manual dimming utilizing rocker button action; also used to adjust lighting levels when in “Lighting” mode and shade positions when in “Shades” mode; additional functionality configurable via software

(6) configurable		High/Low LEDs	Setup controls, display, &
3-position rocker buttons	Label strip	behind label strip	PC port behind hinged cover

Up/Down Button: (1) 3-position rocker pushbutton; configurable for master lighting or shade control, or as a “shift” for Buttons 1-6; other functionality configurable via software

ON: (1) pushbutton, recalls “On” scene

OFF: (1) pushbutton, turns all lights off

LIGHTS, SHADES: (2) Pushbuttons, select “Lights” or “Shades” modes

SAVE, CANCEL, ^, v: (4) Pushbuttons, navigate and execute setup functions

Reset: Recessed miniature pushbutton for hardware reset

LED Indicators

Scenes: (6-white) Correspond with each “Scene” Button

High/Low: (2-white) Indicate “Shift” status

ON: (1-white) Indicates “On” Scene is selected

LIGHTS, SHADES: (2-green) Indicates “Lights” or “Shades” mode is active

SAVE, CANCEL: (2-green) Correspond with “Save” and “Cancel” Buttons

MIN, SEC: (2-green) Indicates display of “Minutes” or “Seconds”

1 – 6: (6-green) 7-Segment bargraphs, indicate lighting levels and shade positions

Numeric Display: (2-green) 8-Segment digits, indicates modes and setup values

IR Receiver	(6) Scene
	LEDs

Motion Detector

(CLS-C6MRF only)

Front View

8.89in

(22.58 cm)

Up/Down	ON & OFF	ON LED
button	buttons

4.48 in

(11.38 cm)

IR Receiver

Reception Frequency: 36 kHz, requires CLS-IRHT8 IR remote (sold separately)

Motion Detector (CLS-C6MRF Only)

Type: Infrared

Range: 20 to 30 feet at 4 foot elevation

Wireless

RF Transceiver: 2-way RF, 2.4 GHz ISM Channels 11-26 (2400 to 2483.6 MHz), IEEE 802.15.4 compliant

RF Output Power: 10 mW

Range (typical): 150 feet indoor, 250 feet outdoor; subject to site-specific conditions C2N-MNETGW gateway required

Environmental

Temperature: 32° to 104°F (0° to 40°C)

Humidity: 10% to 90% RH (non-condensing)

Enclosure

Mounts in a 4-gang electrical box, 3-1/2" deep minimum

Dimensions

Height: 4.48 in (11.38 cm)

Width: 8.89 in (22.58 cm)

Depth: 2.47 in (6.25 cm) for CLS-C6RF, 2.60 in (6.61 cm) for CLS-C6MRF

Weight

1.43 lbs (0.65 kg)

* Sold separately

Rear View

Typical Connections

AVAILABLE ACCESSORIES

C2N-DB	C2N-SDC	CLS-EXP Series	C2N-MNETGW
Decorator Series Keypad	Shade and Drape Controller (120V AC)	Lighting Expansion Modules	infiNET Gateway
CNX-B	C2N-SDC-DC	CLS-C6 or CLS-C6M Series	C2N-MNETRPT
Designer Series Keypad	Shade and Drape Controller (24V DC)	iLux Integrated Lighting System w/Cresnet	infiNET Repeater

C2N-SSC-2	CLS-IRHT8	CNPWS-75
Somfy® Shade Controller	IR Handheld Remote	Cresnet Power Supply
Crestron Electronics, Inc.	15 Volvo Drive l Rockleigh, NJ 07647

Tel: 800.237.2041 / 201.767.3400 l Fax: 201.767.1903

www.crestron.com

All brand names, product names and trademarks are the property of their respective owners. ©2007 Crestron Electronics, Inc.

Specifications subject to change without notice. Doc.4826 12/07