Crimestopper Security Products CS-2002DC SERIES III manual Table Of Contents

TABLE OF CONTENTS

Installation Cautions & Warnings…….……………………………….………………………………………………2

Control Module & Component Mounting……………...………………………..……………………….…………..3

Wiring……..……………………………………………………………………………………………………….…….3-6

Parking Light Jumper Diagram………………………………………………….………………………….…..……..5

Power Door Lock Wiring……………………………………………………….………..………………….…..……6-8

Transmitter Programming………………………………………………………………………………………………9

Option Programming…………………………………………….……………………………….………….….…10-12

Programmable Option Reset………………………………….……………………………….……………..………13

Custom Personal Override Code…………..………………….……………………………….……………………13

Remote Control Diagram…………...……………..……………………………………………………….………….14

Operating Instructions………………………..……………………………………………………………..…….14-17

2 Vehicle Operation……….……………………………………………………………………………………………17

Car Jack Protection Features…………..…………………………………………………………………….………18

LED, Shock Sensor & System Wiring Diagram………………………………………………………..………19-20

INSTALLATION CAUTIONS & WARNINGS

BEFORE BEGINNING, check all vehicle manufacturer cautions and warnings regarding electrical service (AIR BAGS, ABS BRAKES, ENGINE COMPUTERS, BATTERY etc.).

WE RECOMMEND the use of a VOLT/OHM METER to test and verify wiring circuits. Test lights or illuminated probes can cause damage to on-board computer or engine management systems.

DO NOT exceed maximum output ratings.

WE RECOMMEND that the MAIN SYSTEM FUSE be REMOVED before jump starting, using a battery charger, or changing the battery. A voltage surge or high boost condition could damage alarm circuits.

DO NOT ROUTE ANY WIRING THAT MAY BECOME ENTANGLED with brake, and gas pedals, steering column, or any other moving parts in the vehicle.