CS-2004TW1 / CS-2004DC II REMOTE PROGRAMMING
TRANSMITTER PROGRAMMING NOTES (Read first!):
(1)The
(2)The
Remote Transmitters/Transceivers come
TRANSMITTER PROGRAMMING STEPS:
1.Turn key to the ON position and wait 5 seconds.
2.Press Programming/Valet button 4 times.
3.After a few seconds, the unit will flash the parking lights 4 times.
4.A. FOR
5.You should get 2 light flashes indication the unit is waiting for a 2nd code, then press buttons #1 & #2 of a second transmitter, third or fourth or transmitter or transceiver. NOTE, the system will not flash the lights after learning the fourth code. Turn key off to exit programming mode.
TRANSMITTER PROGRAMMING DIAGRAM ON NEXT PAGE.
16