Crimestopper Security Products CS-2004DC II Wiring, Auxiliary 15A On-Boardrelay wiring

WIRING

BLACK/WHITE WIRE: (+/-) OUTPUT FROM ON-BOARD 15A RELAY (Term #30, Step #3)

Connect this wire to your Auxiliary device or Function. The function of this output depends on the connection of the Gray wire and the polarity of this output matches the White/Red wire. (See diagram below)

Orange/Black	(-) Neg. Domelight Illumination
Brown/Black	(-) Neg. Auxiliary Channel #1	Choose One
Red/Black	(-) Neg. Auxiliary Channel #2

Auxiliary 15A On-Board relay wiring

Gray (Term #85)
White/Red (Term #87)	+12V or	INPUT
		SOURCE
Black/White (Term #30)	15A Relay Output:
	Aux. #1, Aux. #2 or
	Dome light Illumination

BROWN/WHITE: (-) HORN HONK OUTPUT (Optional, May require a relay)

Connect to the Negative Horn Trigger wire usually located at or near the steering column. If the vehicle horn circuit requires +12V, then a relay is required. RELAY WIRING: Connect the Brown/White wire to terminal 85, connect relay terminals 86 and 87 to +12V constant power. Connect terminal 30 of the relay to the +12V positive device/circuit to be activated.

5