Crimestopper Security Products CS-882 OEM Operating Insructions, Valet Mode, Open Door Warning

Models: CS-882 OEM

1 12
Download 12 pages 1.74 Kb
Page 12
Image 12
OPERATING INSRUCTIONS

OPERATING INSRUCTIONS

VALET MODE

To disable alarm functions of the 882 system, turn the Ignition ON and press the override/program button 3 times within 8 seconds. After 8 seconds, the dash LED turns on solid as an indicator that the system is in valet mode. Repeat this steps to exit VALET mode. The LED will go out, system will chirp (2) times and the light will flash (2) times when exiting valet mode.

When in VALET mode the siren will still chirp for lock/unlock confirmation even though alarm functions are disabled. The CS-882 system will chirp 2 times when locking the doors and 3 times when unlocking the doors.

PANIC MODE (Programmable Option)

To activate your system during an emergency situation or to attract attention to your vehicle, press the Lock button on your remote 3 times within 5 seconds. This will activate a 30-second alarm trigger. Press any button on your remote to disarm.

FACTORY TRUNK RELEASE SENSING

If the CS-882 system is installed in a vehicle with trunk pop or hatch release button on the Factory Remote, there is a special input wire that will prevent the system from triggering if the trunk button on your remote is pressed while the system is armed.

OPEN DOOR WARNING

If the vehicle door is left open when arming system, you will hear 5-siren chirps after 10 seconds. This may be programmed for a 1-minute delay for vehicles with delayed dome lights using program option #2.

12

Page 12
Image 12
Crimestopper Security Products CS-882 OEM Operating Insructions, Valet Mode, PANIC MODE Programmable Option