PROGRAMMABLE OPTIONS
1.Turn the Ignition ON and press the Override/Program button 7 times within 10 seconds.
2.Turn OFF Ignition. LED will flash slowly once per second as and indicator the system is in programming mode.
3.Within 20 seconds, press the Override/Program button the number of times that corresponds to the feature list below. The siren will chirp for each button press. DO NOT LOSE COUNT!! You can hold down the button for 3 seconds and release to get 2 chirps. A
4.When you get to the desired option number, turn the Ignition from OFF to ON to toggle between the default and alternate settings. The siren will chirp once or twice confirming that the Default or Alternate Option was selected. See Below for Option numbers, descriptions, and values. Ignition should be left in the OFF position once your have made the selection.
5.At this time, if you need to change more options, repeat steps 3 & 4 above.
6.To exit programming Mode, Turn Ignition ON and press the Override/Program button once.
OPTION PROGRAMMING CHART
Option # | Description | Default | ALTERNATE |
|
| (1 chirp) | (2 chirps) |
1 | Flashing Lights | ON | OFF |
|
|
|
|
2 | Door Warning Delay | 10 Sec. | 60 Sec. |
6 | Siren/Horn Confirmation | ON | OFF |
8 | Passive Arming | OFF | ON |
10 | Door Trigger Input Polarity | NEGATIVE | POSITIVE |
|
|
|
|
14 | Allow Panic Mode | OFF | ON |
15 | Horn or Siren output | HORN | SIREN |
| (White/Red wire) |
| |
|
|
| |
16 | Mode A/B Select | Mode A | Mode B |
25 | Restore Default | YES | N/A |
1. FLASHING LIGHTS
This option on controls whether the
2. DOOR WARNING DELAY
This setting changes the delay time (10 or 60 seconds) in which the alarm system begins to monitor the Door circuit. This option can prevent the alarm from giving warning chirps on vehicles with a delayed dome light.
9