WIRING: 4-PIN Shock Sensor (22 Gauge wires)
SHOCK SENSOR: The sensor supplied with this system does not require any additional wiring. Simply mount the sensor in a suitable location, plug it in, and adjust the sensitivity. There are 2 LED’s on the shock sensor to assist you in adjusting sensitivity. The Blue LED indicates the “Warn Away” level and the Red LED indicates a full alarm shock sensor violation.
Use the adjustment knob to set the sensitivity of the sensor. The adjustment knob adjusts both
SHOCK SENSOR
BLUE LED
Adjustment
RED LED (Trigger)
(-) TRIGGER YELLOW
GROUND RED
12 VOLTS BLACK
12