Crimestopper Security Products SP-500 manual Programmable Option Descriptions, Engine Monitoring

OPTION PROGRAMMING TABLE

20	PINK Wire function		Passive Carjack	*Glow Plug*
21	Starter Cranking Time (Option		0.75 Sec.	*0.5 Sec.*	1.0 Sec.	1.5 Sec.
	#16 is set to Timed Crank)
22	Diesel Glow Plug Delay		10 Seconds	*Monitor Glow	20 Seconds	30 Seconds
				Plug
23	Remote Start Engine Run		12 Minutes	*24 Minutes*	36 Minutes	48 Minutes
	Time
24	Smart Tachless Voltage	-1%		1%	*Set to 93% for
	Adjustment 79-100%				default*
25	Horn Pulse		Pulse With Trigger	No Warn-A-Way	*All Functions*	All Functions
			(No Chirps)			Short Chirp
26	Aux # 3		Steady Momentary	*Momentary*	Timed	Latch On/Off
27	Aux # 3 Time : 1 to 255 sec.		-1 Second	+1 Second	*Default 12 Sec.*
28	Aux # 4		Steady Momentary	*Momentary*	Timed	Latch On/Off
29	Aux # 4 Time : 1 to 255 sec.		-1 Second	+1 Second	*Default 12 Sec.*
30	Turbo Timer Mode		Brake Pedal Set Mode	*Always Set Mode*	Idle Down Mode
	1 to 5 Minutes
31	Reset Options to default (*)			*Reset All
				Options*

PROGRAMMABLE OPTION DESCRIPTIONS:

1. ENGINE MONITORING:

This option sets how the unit monitors your engine. You can program either for Tach mode in which the unit uses a Tach signal (RPM) or for “Ultra-Smart” Tachless mode that monitors voltage level. See pages 16-18 for more information and additional steps for actual Tach learning and Tach finder modes.

2. AUTOLOCK/UNLOCK W/IGNITION:

Controls whether the doors will automatically lock when the ignition is turned on and unlock when the ignition is turned off. Doors will not lock if they are open to prevent locking the keys in.

21