Crosley 316257131 manual Setting Surface & Oven Controls, To Set the 4 Button Minute Timer

Models: 316257131

1 12
Download 12 pages 46.62 Kb
Page 6
Image 6
“:” Flashing indicates

Setting Clock & Minute Timer (some models)

Note: The Electronic Time of Day clock graphics shown vary by model.

“:” Flashing indicates

Minute Timer mode

To Set the 4 Button Time of Day Clock (some models)

When the range is first plugged in, or when the power supply to the range has been interrupted, "12:00" will flash in the display window.

1.Push To Set the 4 Button Time of Day Clock (some models).

2.Push in and hold To Set the 4 Button Minute Timer or Setting Surface & Oven Controls until the correct time appears in the display. To Operate the Surface Elements Increases time and Manual background decreases time.

To Set the 4 Button Minute Timer

1.Push Manual background, "0:00" will appear in the display window. The timer can be set for any amount of time from 00:01 minute to 12:00 hours.

2.Push in and hold Manual background until the correct amount of time appears in the display. Manual background Increases time and Manual background decreases time. The minute timer will automatically start when the button is released. The “:” will flash to indicate Minute Timer mode.

3.When the set time has passed, the control will display "0:00" and beep three times. The timer will continue to beep until

Manual background or Manual background is pressed at which time the timer will return to the clock mode.

Note: Push Manual background at any time to cancel the timer and return to the clock operation.

Setting Surface & Oven Controls

To Operate the Surface Elements

1.Place cooking utensil on the surface element.

2.Push in and turn the surface control knob in either direction to the desired setting. Start most cooking operations on a higher setting and then turn to a lower setting to finish cooking. The control knobs do not have to be set exactly on a particular setting. Use the settings as a guide and adjust the control knob as needed.

3.When cooking is completed, turn the surface element off before removing the pan. Note: The Surface or Element On indicator light(s) will glow when one or more surface elements are turned on. A quick glance at this indicator light(s) when cooking is finished is an easy check to be sure all surface elements are turned off.

Manual background Do not place plastic items such as salt and pepper shakers, spoon holders or plastic wrappings on top of the range when it is in use. These items could melt or ignite. Potholders, towels or wooden spoons could catch fire if placed too close to the surface elements.

Note: The size and type of utensil used, and the amount and type of food being cooked will influence the setting needed for best cooking results.

6

Page 6
Image 6
Crosley 316257131 manual Setting Surface & Oven Controls, To Set the 4 Button Time of Day Clock some models