Crosley CR-78 manual Basic Operation, Power Up Your Crosley, Functions cont, Function Select

Models: CR-78

1 14
Download 14 pages 47.08 Kb
Page 8
Image 8
Basic Operation
Press the VOL- button to decrease the volume.

Basic Operation

Power Up Your Crosley

1 Your new Crosley is equipped with a POWER button and a STANDBY button. When you first plug your radio in, push the POWER button in. Doing this will turn on a red light right above the POWER button. You should leave this button pushed in at all times. Turning off the main power will erase all settings and stations you have programmed into your radio.

2 Once the red light is on, press the STANDBY button. This will turn the red light to green. Your radio is now ready to operate. Use the STANDBY button to turn the power on or off. When the radio is on standby, all the stations and presets will remain stored.

Functions

Electronic Volume Control

1 Press the VOL+ button to increase the volume.

The volume level will be shown in the LCD display.

ELectronic volume control display

Note: Volume range for some units may start at level 15 and end at level 40.

2

3 Press and hold either the VOL+ or the VOL- button to continuously increase or decrease the volume. The volume will continue to increase or decrease until the button is released.

4 Press the MUTE button to set the volume to 0. Press the MUTE button again to return to the previous volume level.

Functions (cont.)

Function Select

1 Press the TUNER button to enable the AM/ FM tuning function. When in tuner mode, the LCD will display the band (AM/FM), and the station frequency.

Receiving tuning frequency display

2 Press the CD button to set to CD mode. When first set to CD mode, the display will search for CD and track information.

CD TOC reading display

 

After reading display

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3 Press the PHONO button to set to phono mode.

When in phono mode, the display will read “LINE”.

Phono display

PHONO

4 Press the TAPE button to set to cassette mode. The display will read “TAPE” when in cassette mode.

Tape mode display

TAPE

Equalizer

1 Your radio has a built in equalizer. The equalizer fine tunes the sound according to the type of music you like. Pressing the EQ button results in the following changes:

FLAT Power Up Your Crosley ROCKFunctions Jazz

CLASSICElectronic Volume Control POP

Equalizer “ROCK”

ROCK

TACK

7

Page 8
Image 8
Crosley CR-78 manual Basic Operation, Power Up Your Crosley, Functions cont, Electronic Volume Control, Function Select