Crosley W10151585B Drying, Cycle, and Temperature Tips, Cycles, Drying tips, Permanent Press

Models: W10151585B

1 16
Download 16 pages 3.86 Kb
Page 10
Image 10
Drying, Cycle, and Temperature Tips

Drying, Cycle, and Temperature Tips

Select the correct cycle and temperature for your load.

Your dryer tumbles the load without heat during the last few minutes of all cycles to make the load easier to handle.

Drying tips

Follow care label directions when they are available.

If desired, add a fabric softener sheet. Follow package instructions.

Remove load from the dryer as soon as tumbling stops to reduce wrinkling. This is especially important for permanent press, knits, and synthetic fabrics.

Cycle and temperature tips

Dry most loads using the Energy Preferred Automatic Setting (*).

Use a no heat (air) setting for rubber, plastic, or heat-sensitive fabrics.

Line-dry bonded or laminated fabrics.

NOTE: If you have questions about drying temperatures for various loads, refer to the care label directions.

Cycles

Cycle Control knob

Permanent Press

This automatic cycle shuts off the dryer when the selected dryness is reached. The Cycle Control knob does not move until the load is almost dry. After the cool down, the knob automatically turns to an Off area and tumbling stops.

Dry most loads using the Energy Preferred Automatic Setting (*).

If the load is drier than you like, select a setting closer to Less Dry the next time you dry a similar load.

If the load is not as dry as you like, complete drying using the Timed Drying cycle. The next time you dry a similar load, select a setting closer to More Dry.

NOTE: Drying time with an automatic cycle varies according to the type of fabric and size of load.

Air Dry Cycle

Use this cycle for items that require drying without heat, such as rubber, plastic, and heat-sensitive fabrics. See the chart for examples of items that can be dried using an air cycle.

Type of Load

Time*

Foam rubber—pillows, padded bras, stuffed

 

toys

20 - 30

Plastic—shower curtains, tablecloths

20 - 30

Rubber-backed rugs

40 - 50

Olefin, polypropylene, sheer nylon

10 - 20

 

 

*(Minutes). Reset cycle to complete drying, if needed.

When using an air cycle

Check to see that coverings are securely stitched.

Shake and fluff pillows by hand periodically during cycle.

Dry item completely. Foam rubber pillows are slow to dry.

Timed Dry Cycle

Use this cycle to complete drying if items are still damp after the automatic cycle.

Timed Dry is also useful for:

Heavyweight items and work clothes that require a long drying time.

Lightweight items, such as lingerie, blouses, and knits that require a short drying time.

For damp dry, turn the Cycle Control knob to 30 minutes or less.

End of Cycle Signal

The dryer sounds a signal to let you know when the cycle is finished. The signal is not adjustable and cannot be turned off. The signal is helpful when you are drying permanent press, synthetics, and other items that should be removed as soon as the dryer stops.

10

Page 10
Image 10
Crosley W10151585B Drying, Cycle, and Temperature Tips, Cycles, Drying tips, Cycle and temperature tips, Permanent Press