CD Operation
CD Operation
Programming
Remote Controls
Control Locators
1 Press FUNCTION (6/65) until CD appears on LCD display.
2
3 Place a CD in the CD drawer with the label side facing up.
4 Press OPEN/CLOSE (11) again to close the CD drawer.
5 The total number of tracks and the total play time will show on the display.
6
7 Press SKIP+(8/41) to go forward to the next track.
8 Press SKIP- (10/42) to go backward to the previous track.
9
10 To pause during playback, press PLAY/PAUSE (7/44). Press again to resume playback.
Up to 64 tracks can be programmed for play in any desired sequence.
**The track must be programmed in the stop mode. **The same track can be programmed more than
once.
1 While the CD is stopped, press the PROGRAM button (15/45). “00” will begin to flash on the display. After a second, “Memory” and “000
P - - 01” will show on the display.
2 Press SKIP+ (8/41) or SKIP- (10/42) to select the desired track you wish to program.
3 Press PROGRAM (15/45) to store the selected track. “00” and
4 Repeat steps 2 and 3 to program additional tracks into memory..
5 Press PLAY/PAUSE(7/44) to begin playback of the programmed tracks.
Note: If programming songs from MP3 CD’s containing different albums/folders, you will first have to select an album/folder. After pressing PROGRAM, use the SKIP+ or SKIP- buttons to select an album/folder and press the PROGRAM button again to enter the album/folder. Once the album/folder is selected, proceed with steps 2- 5 above to program tracks into memory.
6 Press PLAY/PAUSE (7/44) to begin playback of the programmed tracks.
36)POWER
37)AM/FM
38)AUX
39)FIND/ESP. MO./ST.
40)PRESET
41)SCAN/SKIP +
42)SCAN/SKIP -
43)PRESET
44)PLAY/PAUSE
45)PROGRAM
46)INTRO
47)STOP
48)4
49)3
50)6
51)0
52)9
53)8
54)7
55)5
56)2
57)1
58)RANDOM
59)REPEAT
60)VOLUME -
61)BBS
62)EQ
63)VOLUME +
64)MUTE
65)FUNCTION
36 | 37 |
65 |
|
64 |
|
63 |
|
62 |
|
61 |
|
60 |
|
59 |
|
58 |
|
57 |
|
56 |
|
55 |
|
54 |
|
53 |
|
38 |
39 |
40 |
41 |
42 |
43 |
44 |
45 |
46 |
47 |
48 |
49 |
50 |
51 |
52 |
8
5