Clock & Alarm Operation
Control Locators
Setting The Clock
The clock time can be set with the power turned on or off as long as the unit is plugged in. To set the clock, follow the instructions below.
1 Press the TIME (14) button. The clock display will begin to flash.
2 Press the FORWARD SKIP 
(16) button to set the hour.
Note: There is a PM indicator light that will come on to denote PM hours.
3 Press the BACKWARD SKIP 
(17) button to set the minutes.
4 Once the correct time is set, press the TIME (14) button again to store the time.
5 To switch between 12H and 24H mode, press and hold the TIME (14) button.
Setting The Alarm
This unit features dual alarms. You can set each alarm to wake you at different times. The alarms can be set with the power turned on or off as long as the unit is plugged in. To set the alarm(s), follow the instructions below.
To set Alarm 1
1 Press Alarm 1. The clock display will switch to alarm time and start to flash. The Alarm 1 LED will come on.
2 Press the FORWARD SKIP 
(16) button to set the hour.
Note : There is a PM indicator light that will come on to denote PM hours.
3 Press the BACKWARD SKIP 
(17) button to set the minutes.
4 Once you have the correct alarm time set for Alarm 1, press the Alarm 1 button again to turn the alarm on. The Alarm 1 LED with stay lit.
5 To turn the alarm off, press the Alarm 1 button again. The alarm will turn off and the LED light will go off.
6 Once set, the alarm will sound once the clock reaches the set alarm time for Alarm 1. The Alarm 1 LED will begin to Flash.
7 To turn the alarm off while it is going off, press the Alarm 1 button.
8
To set Alarm 2
1 Press Alarm 2. The clock display will switch to alarm time and start to flash. The Alarm 2 LED will come on.
2 Press the FORWARD SKIP 
(16) button to set the hour.
Note : There is a PM indicator light that will come on to denote PM hours.
3 Press the BACKWARD SKIP 
(17) button to set the minutes.
4 Once you have the correct alarm time set for Alarm 2, press the Alarm 2 button again to turn the alarm on. The Alarm 2 LED with stay lit.
5 To turn the alarm off, press the Alarm 2 button again. The alarm will turn off and the LED light will go off.
6 Once set, the alarm will sound once the clock reaches the set alarm time for Alarm 2. The Alarm 2 LED will begin to flash.
7 To turn the alarm off while it is going off, press the Alarm 2 button.
Note : The alarm will wake you to Radio, CD or Buzzer. Turn the FUNCTION SWITCH to your desired wake up mode. You can set this mode with the radio on or off. In the case of power outage, the alarm will wake you to Buzzer if the battery is installed. The alarm will sound for 60 minutes if not stopped manually by pressing Snooze or by turning the alarm off.
Unit Controls
22Snooze
23CD Door Open
24FM Wire Antenna
25Battery Cover
26AC Power Cord
23
22
24 | 26 |
| |
| 25 |
5
