Crown 2, 3, 1 manual Accessories, Mt-Xlr, Mt-Bb

Power Base Series Power Amplifiers

5 Accessories

There are two accessories available at the time of this printing: the MT-XLRand the MT-BB. Important: The

MT-XLRand MT-BBmust be installed at a Crown Factory Service Center or the Crown factory.

5.1 MT-XLR

The MT-XLRis an accessory panel that provides two standard 3-pin female XLR input connectors. The MT-XLRaccessory makes it easy to quickly change connections in a system that uses standard XLR con- nectors. It can also be used in systems that need to daisy chain an input signal from one amplifier to an-

MT-XLR C H - 2 I N P U T C H - 1 I N P U T

other. Because the MT-XLRconnectors are wired in parallel with the amplifier’s built in phone jack connec- tors, an input signal fed to either input can be fed to another amplifier from the unused connector for that channel.

5.2 MT-BB

The MT-BBis an accessory panel that provides barrier strip input connectors. An MT-BBaccessory might be desirable in applications requiring bare wire connec- tions. It can also be used to daisy chain an input signal from one amplifier to another just like the MT-XLR.

MT-BB	C H - 2 I N P U T		C H - 1 I N P U T
	–	+	–	+

PUSH PUSH

GND

THESE XLR INPUTS ARE CONNECTED IN PARALLEL WITH THE PHONE JACK INPUTS.

3

1 2

Fig. 5.1 The MT-XLR

Fig. 5.2 The MT-BB

Page 19