3
Table of Contents |
| |
Introduction | 4 | |
Chapter 1: Crown Amplifiers | 5 | |
1.1 | Rack Cooling | 5 |
| 1.1.1 | 5 |
| 1.1.2 | 6 |
1.2 | System Wiring | 7 |
| 1.2.1 Input Wiring | 7 |
| Input Connector Wiring | 7 |
| Balanced, Grounded Source | 7 |
| Balanced, Floating Source | 7 |
| Unbalanced, Grounded Source, | 8 |
| Unbalanced, Floating Source, | 8 |
| Unbalanced, Grounded Source, |
|
| Coax or | 8 |
| Unbalanced, Floating Source, |
|
| Coax or | 8 |
| 1.2.2 Solving Input Problems | 9 |
1.3 | Output Wiring | 10 |
| 1.3.1 Output Connector Wiring | 10 |
| 10 | |
| Barrier Block | 11 |
| Neutrik® Speakon® | 11 |
| 1.3.2 Amplifi er Load Impedance | 13 |
| 1.3.3 Determining Appropriate Speaker Wire Gauge | 14 |
| 1.3.4 Loudspeaker Protection | 15 |
| 1.3.5 Solving Output Problems | 16 |
| 16 | |
| 16 | |
| 1.3.6 Distributed Speaker Systems | 17 |
| What is Constant Voltage? | 17 |
| Transformer Saturation | 17 |
1.4 | 18 | |
| 1.4.1 Active vs. Passive Crossover Networks | 18 |
1.5 | Fault Monitoring | 20 |
1.6 | Setting System Gain Structure | 21 |
| 1.6.1 System Levels | 21 |
| 1.6.2 Amplifi er Level | 21 |
Chapter 2: Troubleshooting | 23 | |
2.1 | No Power | 24 |
2.2 | No Sound | 25 |
2.3 | Bad Sound | 26 |
2.4 | Amp Overheating | 26 |
Chapter 3: Glossary of Terms | 27 | |
Appendix: Suggested Reading | 33 | |
| Amplifier Application Guide |
|