Chapter 1: Crown Amplifiers | 7 |
1.2 System Wiring
The information in this section covers making input and output wiring connec- tions, as well as troubleshooting problems relating to system wiring.
1.2.1 Input Wiring
Input Connector Wiring
Refer to the following diagrams for input cable wiring for
Note: These diagrams follow the AES wiring convention of Pin 2 = hot for XLR connectors.
Balanced, Grounded Source
For use with components equipped with
Balanced, Floating Source
For use with components equipped with
AC line cord or battery power.
Note: If two or more channels with the same input ground reference are driven from the same fl oating source, connect only one shield to the source chassis
Amplifier Application Guide