Crown Audio 180MAx 2Setup, Output VCA Connector, Commercial Audio Series Business Music System

2Setup

2.8Remote Volume Control

You can control the volume of each amplifier channel remotely. To do so, locate the OUTPUT VCA connector on the back panel. Insert a 4-pin Phoenix-type cable connector into the OUTPUT VCA connector. Wire a Crown 1-VCAP or 4-VCAP level control to the Phoenix-type cable connector terminals as shown in Figure 2.12.

1-VCAP controls one channel; 4-VCAP controls up to four channels.

Output VCA Connector

Phoenix-type plug

Shield

Commercial Audio Series Business Music System

2.9 Mounting the Speakers (180MAx Pack Only)

JBL supplies a variety of wall mounts and ceiling mounts for the Control 1ST loudspeaker:

•MTC-1A Wall/Ceiling Mount (included with 180MAx Pack)

•MTC-2 Plus Wall/Ceiling Mount

•TC-7 American Microphone Stand Adapter

•MTC-8 Wall Mount Bracket

For details, see http://www.jblpro.com/pages/recording/control. htm#Control1.

Output VCA Connector

Figure 2.12 Wiring a 1-VCAP or 4-VCAP Level Control to the Output VCA Connector

page 12 Operation Manual