Crown Audio IQ-PIP-LITE Controls, Indicators and Connectors, A. Balanced Audio Input Connectors

Controls, Indicators and Connectors

A. Balanced Audio Input Connectors

3-pin removable barrier-strip connectors, one per channel.

B. Preset Indicator

Signals the number of the current preset, if active, by flashing a series of flashes equal to the current preset number.

C. Reset/Preset Switch

Used to change presets, restore settings to factory default or restore all the presets to the factory defaults. During operations of the switch, the Data indicator flashes as an aid to the user.

D. IQ Data Indicator

Flashes when the IQ-PIP-LITE receives a valid command that is addressed to the IQ-PIP-LITE.

E. AUX Connector

Configurable for AUX input, AUX output, or Listen Bus.

F. Network Connector

The network connector is a standard RJ-45 connector that allows the IQ-PIP-LITE to connect to an Ethernet network. Connection is made using a standard CAT 5 cable to a network switch port. The Link Activity LED indicates data activity on the network line. The 100 MB LED indicates that the data is at 100 Megabits.

G. Mounting Holes

IQ-PIP-LITE

Figure 1. Front Panel Indicators and Connectors

Crown’s Three-Year, No-Fault, Fully Transferable Warranty

Crown offers a Three-Year, No-Fault, Fully Transferable Warranty for every new Crown IQ component—an unsurpassed industry standard. With this unprecedented No-Fault protection, your new Crown IQ component is warranted to meet or exceed original specifications for the first three years of ownership. During this time, if your unit fails, or does not perform to original specifications, it will be repaired or replaced at our expense. About the only things not covered by this warranty are those losses normally covered by insurance and those cuased by intentional abuse. And the coverage is transferable, should you sell your unit.

See your authorized Crown dealer for full warranty disclosure and details. For customers outside of the USA, please contact your authorized Crown distributor for warranty information or call 574-294-8200.

Crown International 1718 W. Mishawaka Rd. Elkhart, IN 46517-9439 TEL: 574-294-8200 FAX: 574-294-8FAX www.crownaudio.com

Specifications subject to change without prior notice. Latest information available at www.crownaudio.com and iqaudio- systems.com.

Crown, Crown Audio, IQ, and Macro-Tech are registered trademarks of Crown International. SmartAmp, PIP, and PIP2 are trademarks of Crown International. HiQnet is a trademark of Harman International Industries, Inc. Other trademarks are the property of their respective owners. Printed in U.S.A.

© 2005 Crown Audio®, Inc.

7/05 135802-3C