MA 2402 Power Amplifier
8 Specifications
Minimum Guaranteed Power |
|
120 VAC, 60 Hz Units, Stereo mode, per channel, both channels driven |
|
|
|
1 kHz with 0.1% THD |
|
Stereo, 2 ohms per ch. | 1,050 W |
Stereo, 4 ohms per ch. | 800 W |
Stereo, 8 ohms per ch. | 520 W |
|
|
120 VAC, 60 Hz Units, Bridge mono mode |
|
|
|
1 kHz with 0.1% THD |
|
4 ohms | 2,070 W |
8 ohms | 1,585 W |
16 ohms | 1,035 W |
|
|
120 VAC, 60 Hz Units, Parallel mono mode |
|
|
|
1 kHz with 0.1% THD |
|
1 ohm | 2,080 W |
2 ohms | 1,605 W |
4 ohms | 1,035 W |
Performance | |
Frequency Response (at 1 watt, 20 Hz - 20 kHz) | ± 0.1 dB |
|
|
Phase Response (at 1 watt, 10 Hz - 20 kHz) | ± 10° |
|
|
Signal to Noise Ratio below rated full bandwidth power |
|
20 Hz to 20 kHz | > 100 dB |
> 105 dB | |
|
|
Total Harmonic Distortion (THD) at rated power, from 20 Hz to 1 kHz | < 0.05% |
|
|
Total Harmonic Distortion (THD) at rated power, at 20 kHz | 0.1% |
|
|
Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1, | < 0.05% |
from 163 milliwatts to full bandwidth power |
|
|
|
Damping Factor: 10 Hz to 400 Hz | > 1000 |
|
|
Crosstalk (below rated power, 20 Hz to 1 kHz) | > 85 dB |
|
|
Controlled Slew Rate | > 13 volts/microsecond |
|
|
Input Impedance (nominal) balanced, unbalanced | 20 k ohms, 10 k ohms |
|
|
Operation Manual | page 21 |
