Combined AV Headset Application

Step 3: Open sbc_decode Workspace

Select Project / Open Workspace, navigate to \BlueLab\apps\av_headset_hfp and select sbc_decoder.xiw.

Figure 5.3: Open sbc_decode Workspace

Step 4: Optional – set streaming options

Three options are defined in the code to control the latency/robustness of the DSP buffer operation. By default this is set to maximum robustness (STREAMING_MAX_RANGE_AND_ROBUSTNESS).

If this option is acceptable proceed to step 5.

Note: Only one option can be defined when building the project.

However, if a reduction in latency is required, two other options are available as defined by

STREAMING_STANDARD_LATENCY and STREAMING_LOW_LATENCY.

Note: The values controlled by these definitions can be changed in the code, if required

=Guide User Headset AV Combined =îPKO=»äìÉi~Ä_

blab-ug-005Pa

© Cambridge Silicon Radio Limited 2005

Page 10 of 24

This material is subject to CSR’s non-disclosure agreement.