Decoder behaviour settings

8 Decoder behaviour settings

The codec library contains a range of settings that control the decoding behaviour of the DSP.

The values defined for the variable $decoder_codec_stream_struc control the user experience, especially when the device is at the extreme limits of Bluetooth range.

The parameters themselves are defined in the $decoder_codec_stream_struc source code found in C:\BlueLab\apps\av_headset_hfp\codec_decoder.asm. The numerical values can be simply manipulated in the source code to optimise the required.

Note: The decoder project must be rebuilt in xIDE when any of these parameter values is changed in the source code.

See the xIDE on-line help (DSP Reference guide/File List/codec/stream_decode) for further explanation.

=Guide User Headset AV Combined =îPKO=»äìÉi~Ä_

blab-ug-005Pa

© Cambridge Silicon Radio Limited 2005

Page 21 of 24

This material is subject to CSR’s non-disclosure agreement.