CSR v3.2 5 Combined AV Headset Application, 5.1Building the Combined Headset Application

Combined AV Headset Application

5 Combined AV Headset Application

When BlueLab v3.2 has been successfully installed, the Combined AV Headset application can be built and executed using the application source code, shipped with BlueLab v3.2.

This section guides you step-by-step through the process of building and executing this application.

The application implements the following profiles:

!Headset Profile

!Handsfree Profile

!Advanced Audio Distribution Profile

!Audio/Video Remote Control Profile

This enables stereo music to be streamed to the headset with the ability to accept and make telephone calls via a Bluetooth-enabled mobile phone.

5.1Building the Combined Headset Application

Step 1: Connect BlueCore3-Multimedia Development Board

1.Connect your BlueCore3-Multimedia Development Board to your PC per the instructions supplied with the development kit.

2.Ensure that you have connected the mini-USB connection and the SPI connection.

3.Turn on the board and ensure that the jumpers are configured as shown in Figure 5.1.

ON Figure 5.1: BlueCore3-Multimedia Development Board

ON

OFF

ON

blab-ug-005Pa	© Cambridge Silicon Radio Limited 2005	Page 8 of 24
	This material is subject to CSR’s non-disclosure agreement.

=Guide User Headset AV Combined =îPKO=»äìÉi~Ä_