TIRES

The recommended operating tire pressure is approximately 10 psi for the rear tires and 10 psi for the front tires. Refer to the tire sidewall for exact tire manufacturer’s recommended psi. Do not overinflate. Uneven tire pressure could cause the cutting deck to mow unevenly.

CUTTING BLADES

WARNING: Cutting blades are sharp. Always protect your hands by wearing heavy leather work gloves to grasp blades.

The blades may be removed for sharpening or replacement as follows.

•Remove the deck from beneath the tractor, (refer to DECK REMOVAL earlier in this section for detailed instructions) then gently flip the deck over to expose its underside.

•Place a block of wood between the center deck housing baffle and the cutting blade to act as a stabilizer. See Figure 22.

Hex Flange Nut

Block of Wood

Spindle

Cutting Blade

Assembly

 

Figure 22

•Use a 15/16" wrench to remove the hex flange nut that secures the blade to the spindle assembly. See Figure 22.

NOTE: The hex flange nut has a right-handed (normal) thread pattern. Do NOT attempt to force the nut in the incorrect direction. Doing so may damage the nut and create a safety hazard.

To properly sharpen the cutting blades, remove equal amounts of metal from both ends of the blades along the cutting edges. See Figure 23.

Sharpen the cutting edge straight across, parallel to the trailing edge, at a 25° to 30° angle. See Figure 23.

IMPORTANT: If the cutting edge of the blade has already been sharpened to within 5/8" of the wind wing radius, or if any metal separation is present, replace the worn blades with new ones. See Figure 23.

Blade Separation

Worn Blade Edge

Wind Wing

 

5/8" minimum Sharpen Edge Evenly

Figure 23

It is extremely important that each cutting blade edge be ground equally to maintain proper blade balance. An unbalanced blade will cause excessive vibration when rotating at high speeds, may cause damage to the tractor and result in personal injury. The blade can be tested by balancing it on a round shaft screwdriver. Grind metal from the heavy side until it balances evenly.

When replacing the blade, be sure to install the blade with the side of the blade marked ‘‘Bottom’’ (or with a part number stamped in it) facing the ground when the mower is in the operating position.

IMPORTANT: Use a torque wrench to tighten the blade spindle hex flange nut to between 70 foot- pounds and 90 foot-pounds.

23

Page 22 Page 24
Page 23
Image 23
Cub Cadet 1212 manual Tires, Cutting Blades
Page 22 Page 24

1212 specifications

The Cub Cadet 1212 is a compact lawn tractor that stands out for its powerful performance, ease of use, and innovative features designed for homeowners and gardening enthusiasts. Built for durability and versatility, the 1212 combines traditional craftsmanship with modern technology, making it an ideal choice for maintaining residential landscapes.

At the heart of the Cub Cadet 1212 is its robust Kohler engine, which typically boasts around 12 horsepower. This engine delivers exceptional torque and reliability, allowing users to tackle a variety of tasks, from mowing the lawn to hauling light loads. The machine's hydrostatic transmission provides smooth, variable speed control, enabling operators to maneuver with precision and minimal effort. This feature significantly enhances the user experience, especially when navigating tight corners and uneven terrain.

One of the standout features of the Cub Cadet 1212 is its 38-inch cutting deck. This mid-sized deck is perfect for small to medium-sized yards. The deck is designed for easy height adjustment, allowing users to customize their mowing height for different grass types and seasonal conditions. Furthermore, the deck incorporates a deck wash system, which makes maintenance simple by enabling easy cleaning after mowing sessions.

The Cub Cadet 1212 is equipped with ergonomic controls that enhance comfort during operation. The soft-touch steering wheel and comfortable seating ensure that users can operate the tractor for extended periods without discomfort. Additionally, the easy-to-reach controls allow for a seamless transition between different functionalities, such as switching from mowing to attaching optional accessories like baggers or snow throwers.

In terms of build quality, the 1212 demonstrates robust construction featuring a sturdy steel frame designed to withstand the rigors of regular use. This durability is complemented by a reliable starting system, often featuring electric start options for added convenience.

Another critical aspect is the innovative design that caters to safety, with features like safety switches that prevent the tractor from being operated when the driver is not in a seated position. This commitment to user safety reflects Cub Cadet's dedication to providing a reliable and enjoyable mowing experience.

In summary, the Cub Cadet 1212 is a versatile and dependable lawn tractor equipped with a variety of features that prioritize performance, comfort, and safety. Its combination of a powerful engine, user-friendly controls, and durable construction makes it an excellent choice for homeowners looking to simplify their lawn care routines. Whether for mowing, hauling, or additional landscaping tasks, the Cub Cadet 1212 continues to be a favored model among gardening enthusiasts.
Top Page Image Contents