NOTE: Be certain that the left roller bracket and the right roller bracket are set in the same position.

SEAT ADJUSTMENT

To adjust the position of the seat, move the seat adjustment lever (located under the seat) to the left and slide the seat forward or backwards. See Figure

10.Make sure seat is locked into one of the six adjustment positions before operating the tractor.

Seat

•Thread the ball joint toward the jam nut to shorten the drag link. Thread the ball joint away from the jam nut to lengthen the drag link.

•Replace hex nut and lock washer and retighten the jam nut after proper adjustment is achieved.

NOTE: Threading the ball joints too far onto the drag links will cause the front tires to"toe-in" too far. Proper toe-in is between 1/16" and 5/16".

Front tire toe-in can be measured as follows:

•Place the steering wheel in position for straight ahead travel. Insert a 1/4" dowel up through aligning holes in both the steering gear and support plate. See Figure 12.

Seat Adjustment Lever

Figure 10

STEERING ADJUSTMENT

Insert Dowel

Here

Support

Plate

Drag Links

Steering Gear

Steering

Shaft

If the tractor turns tighter in one direction than the other, or if the ball joints or drag links are being replaced due to damage or wear, the steering drag links may need to be adjusted.

Hex Nut and

Grease Fitting

Pivot Bar

Lock Washer

 

 

Axle

Drag Link

Ball Joint

Jam Nut

Figure 11

Adjust the drag links so that equal lengths are threaded into the ball joint on the left side and the ball joint on the right side:

•Loosen the jam nut found on the drag link at the rear of the ball joint. See Figure 11.

•Remove the hex nut and lock washer on the top of ball joint. See Figure 11.

NOTE: View shown from beneath tractor.

Figure 12

•In front of the axle, measure the distance horizontally from the inside of the left rim to the inside of the right rim. Note the distance.

•Behind the axle, measure the distance horizontally from the inside of the left rim to the inside of the right rim. Note the distance.

•The measurement taken in front of the axle should be between 1/16" and 5/16" less than the measurement taken behind the axle.

•Adjust if necessary.

CARBURETOR ADJUSTMENT

WARNING: If any adjustments are made to the engine while the engine is running (e.g. carburetor), disengage all clutches and blades. Keep clear of all moving parts.

Refer to separate engine manual packed with your unit for carburetor adjustment information or see an authorized engine service dealer.

NOTE: A dirty air cleaner will cause an engine to run rough and may result in permanent engine damage. Be certain that the air cleaner is clean and attached to the carburetor before attempting to adjust the carburetor.

16

Page 15 Page 17
Page 16
Image 16
Cub Cadet 1212 manual Seat Adjustment, Steering Adjustment, Carburetor Adjustment
Page 15 Page 17

1212 specifications

The Cub Cadet 1212 is a compact lawn tractor that stands out for its powerful performance, ease of use, and innovative features designed for homeowners and gardening enthusiasts. Built for durability and versatility, the 1212 combines traditional craftsmanship with modern technology, making it an ideal choice for maintaining residential landscapes.

At the heart of the Cub Cadet 1212 is its robust Kohler engine, which typically boasts around 12 horsepower. This engine delivers exceptional torque and reliability, allowing users to tackle a variety of tasks, from mowing the lawn to hauling light loads. The machine's hydrostatic transmission provides smooth, variable speed control, enabling operators to maneuver with precision and minimal effort. This feature significantly enhances the user experience, especially when navigating tight corners and uneven terrain.

One of the standout features of the Cub Cadet 1212 is its 38-inch cutting deck. This mid-sized deck is perfect for small to medium-sized yards. The deck is designed for easy height adjustment, allowing users to customize their mowing height for different grass types and seasonal conditions. Furthermore, the deck incorporates a deck wash system, which makes maintenance simple by enabling easy cleaning after mowing sessions.

The Cub Cadet 1212 is equipped with ergonomic controls that enhance comfort during operation. The soft-touch steering wheel and comfortable seating ensure that users can operate the tractor for extended periods without discomfort. Additionally, the easy-to-reach controls allow for a seamless transition between different functionalities, such as switching from mowing to attaching optional accessories like baggers or snow throwers.

In terms of build quality, the 1212 demonstrates robust construction featuring a sturdy steel frame designed to withstand the rigors of regular use. This durability is complemented by a reliable starting system, often featuring electric start options for added convenience.

Another critical aspect is the innovative design that caters to safety, with features like safety switches that prevent the tractor from being operated when the driver is not in a seated position. This commitment to user safety reflects Cub Cadet's dedication to providing a reliable and enjoyable mowing experience.

In summary, the Cub Cadet 1212 is a versatile and dependable lawn tractor equipped with a variety of features that prioritize performance, comfort, and safety. Its combination of a powerful engine, user-friendly controls, and durable construction makes it an excellent choice for homeowners looking to simplify their lawn care routines. Whether for mowing, hauling, or additional landscaping tasks, the Cub Cadet 1212 continues to be a favored model among gardening enthusiasts.
Top Page Image Contents