WORKING WITH DETERGENT
Detergents can only be applied in the “low” setting.
Step1 Slide the detergent tray into one of the slots of your choice. Secure the tray to the frame by fastening the screw.
Step3 Fill a container with Cub Cadet detergent. Place the filter end of detergent suction tube into the container. Be sure to adjust the filter by turning it to the desired detergent intake.
Step2 The wand must be set in the low pressure
Step4 With the engine running, pull trigger to operate unit: Liquid detergent is drawn into the unit and mixed with water. Apply detergent to work area. Do not allow detergent to dry on surface.
For best results see Cleaning Tips on pages 9 & 10 for specific information on how to clean different surfaces.
Caution
Never use:
•Bleach, Chlorine products and other corrosive chemicals
•Liquids containing solvents (i.e., paint thinners, gasoline, oils)
•
•Ammonia products
•
These chemicals will harm the unit and will damage the surface being cleaned.
Always Use Cub Cadet Detergents for Best Results.
Cub Cadet biodegradable detergents are specially formulated to protect the environment and your pressure washer. Special formula won’t clog the suction tube filter and will protect the internal parts of the pressure washer for a longer life. For Cub Cadet Detergents, check your local Cub Cadet dealer. If you need help locating a dealer in your area, contact the Customer Dealer Referral Line by calling:
One gallon container of the following Cub Cadet detergents are available:
• Vehicle Wash | Part No. | |
• Deck Wash | Part No. | |
• | Degreaser | Part No. |
• | All Purpose | Part No. |
| Cleaner |
|
8
