F. Deck leveling Procedure

1.Park the mower on a flat paved surface, engage the parking brake, shut off the engine, remove the key from the ignition switch, disconnect the spark plug wires and using the second foot pedal, lower the mowing deck into the 4" height of cut position. (The 4" height of cut position is recommended in order for one to see and obtain a measurement. Any height of cut position is acceptable as long as a proper measurement can be taken.)

2.Check the right and left front tire pressure. Adjust as necessary to 20-25 psi. Tire pressure can affect blade height by as much as a 1/4”.

3.Check the right and left rear Drive tire pressure. Adjust as necessary to 8-10 psi.

4.Measure blade-to-ground height at the front tip of the right blade. To obtain an accurate measure, align blades in parallel with mower centerline, (i.e. front to back).

5.Measure blade-to-ground height at the front tip of the left blade. Be sure to measure at the blade tip with the blades arranged in proper position.

6.To level the deck, adjust the eyebolt at the left front of the deck (Point B) so that the blade-to-ground height at the right front blade tip matches that of the left front blade tip. This is done by loosening the jam nuts on the eyebolt and tightening the upper nut to raise the deck and loosening the nut to lower the deck. The right front blade tip height is fixed so you must adjust the left front tip to match it.

7.Measure the blade-to-ground height at the right rear blade tip. Again be sure to measure at the blade tip at the rear of the right blade when aligned along the

Height of Cut LInk

Eyebolt

Point B

mower centerline. The blade-to-ground height at the rear of the blade tip should be 1/8" to 1/4” higher than the front tip. This is referred to as blade pitch. The sam height difference should be true for the left blade, measured front and back.

8.To adjust the blade pitch the deck pitch must be adjusted. Loosen the inner jam nuts at the rear of the horizontal threaded rods. Start at Point C to raise the rear of the deck, tighten the rear outer jam nut to raise the deck pitch. Adjust the rear jam nut at Point D to take the “slack out of the threaded rod.

9.The final adjustment would be to take the “slack” out of the left rear linkage (Point D) by adjusting the jam nuts on the eyebolt. Loosen the jam nuts and tighten the upper nut to remove “slack”.

10.In many cases it will be necessary to adjust deck height using both eyebolt adjustments and pitch adjustment to achieve the correct blade-to-ground heights. If you remember that the front right blade tip adjustment is fixed and you level to that height, adjusting the decks will be simplified.

11.Once the deck is level one may find that the height of cut does not match the height of cut indicator. A final adjustment may be made by lowering or rais- ing the height of cut link accordingly. To raise the deck: remove the shoulder bolt mounting the height of cut link to the lift handle and reassemble the shoulder bolt in the lowest of the three holes. To lower the deck: remove the shoulder bolts mounting the height of cut link, flip the height of cut link around and reassemble the shoulder bolts in the top of the set of three holes and the bottom hole. (see Fig. 13)

Main Frame

Eyebolt

Point A

Point D

Point C

Figure. 13

Jam Nuts

29

Page 28 Page 30
Page 29
Image 29
Cub Cadet 53AJ8CT6050 service manual Deck leveling Procedure
Page 28 Page 30

53AJ8CT6050 specifications

The Cub Cadet 53AJ8CT6050 is a riding lawn mower that combines power, precision, and advanced technology to provide an exceptional mowing experience. Designed for homeowners who demand top performance and reliability, this model stands out in the competitive landscape of outdoor power equipment.

One of the key features of the Cub Cadet 53AJ8CT6050 is its powerful engine. Equipped with a robust 18.5 horsepower Kohler engine, it delivers ample torque and speed to tackle a variety of terrains. This ensures a smooth mow even in challenging conditions, making it ideal for both flat lawns and hilly landscapes. The engine is paired with a smooth hydrostatic transmission, allowing for effortless gear changes without the need for shifting.

Another notable characteristic is its innovative cutting system. The mower features a 50-inch cutting deck, designed to cover more ground in less time. The deck's adjustable cutting height, ranging from 1.5 to 4 inches, allows users to customize their mowing experience, ensuring a pristine lawn regardless of grass type. The twin-blade design enhances the mowing efficiency, providing even cutting and superior grass mulching, which can help return vital nutrients back to the soil.

The Cub Cadet 53AJ8CT6050 also emphasizes user comfort and ease of operation. It features a plush, ergonomic operator station with a high-back seat and armrests, allowing for extended use without discomfort. The steering wheel's design enhances maneuverability, making it easier for operators to navigate tight spots and obstacles in their yard.

In terms of technology, the mower incorporates advanced features such as the SmartJet deck washing system, which allows for quick and hassle-free cleaning of the cutting deck after use. This not only maintains the mower's performance but also prolongs its lifespan by preventing grass buildup.

Additionally, the Cub Cadet 53AJ8CT6050 is compatible with a range of attachments, further enhancing its utility. Owners can add accessories such as baggers, carts, and plows, turning the mower into a versatile tool for various lawn and garden tasks.

Overall, the Cub Cadet 53AJ8CT6050 is a well-rounded riding mower that blends performance, comfort, and technology. Whether you have a small suburban lawn or a sprawling estate, this mower is equipped to meet your landscaping needs effectively. With its robust construction and thoughtful features, it's a reliable choice for discerning homeowners looking to invest in quality outdoor equipment.
Top Page Image Contents