Controls and Features

4

 

 

 

Drive Control

Two-way Chute Control™

 

Speed Selector Shift Lever

Auger Control

 

Headlight

Heated Hand Grip

Chute Assembly

 

 

Wheel Steering Control

Clean-out Tool

Chute

Directional

 

Control

Auger

Auger

 

 

Housing

 

Skid Shoe

NOTE: For detailed information on all engine controls, refer to the separate Engine Operator’s Manual supplied with this unit.

Speed Selector Shift Lever

The speed selector shift lever is located in the right side of the handle panel and is used to determine ground speed and direction of travel.

Forward

There are six forward (F) speeds. Position one (1) is the slowest and position six (6) is the fastest.

Reverse

There are two reverse (R) speeds. One (1) is the slower and two (2) is the faster.

Heated Hand Grips

Can be turned on/off by a switch found on the dash panel.

Skid Shoes

Position the skid shoes based on surface conditions. Adjust upward for hard-packed snow. Adjust downward when operating on gravel or crushed rock surfaces.

Augers

When engaged, the augers rotate and draw snow into the auger housing.

Chute Assembly

Snow drawn into the auger housing is discharged out the chute assembly.

Headlight

The headlight is located on the front of the handle panel.

11