Paper Element(Twin Cylinder Engine)

The paper element should be replaced at least once a season, or every 100 hours of operation. Replace more frequently if the tractor is operated under extremely dusty conditions. To replace the paper element, proceed as follows:

•Pivot the air cleaner cover upward and unhook the wire latch which secures the element in place.

•Remove the air cleaner element with precleaner.

•Carefully remove the precleaner from the element and service as instructed earlier in this section.

IMPORTANT: Do not wash the paper element or use pressurized air, as this will damage the element.

Examine the element and discard if dirt and/or damage is present.

NOTE: Handle new elements carefully; do not use if the sealing surfaces are bent or damaged.

•If any loose dirt or debris fell on the air cleaner base when the element was removed, carefully remove it and wipe the base clean. Be careful that none of it drops into the intake.

•Check the air cleaner base. Make sure it is secured and not damaged. Also check the air cleaner cover for damage or improper fit. Replace all damaged air cleaner components.

•Install the precleaner over the new paper element and reinstall the element.

•Lower the wire latch to secure the element in place and pivot the air cleaner cover downward.

Spark Plug(s)

Once a season, or every 100 hours of operation, remove the spark plug(s), check condition, and reset the gap or replace with a new plug(s) as necessary.

•Lift the tractor's hood and locate the spark plug wire on the front, right area of the engine.

•Carefully pull the spark plug wire boot(s) off of the spark plug(s).

•Before removing each spark plug, clean the area around the base of the plug to keep dirt and debris out of the engine.

•Using a ratchet with a 5/8-inch spark plug socket, remove the spark plug and check its condition.

•Replace the plug if worn, dirty or damaged. Reuse only after resetting the gap as instructed.

NOTE: Do not clean the spark plug with an abrasive grit. Some grit could remain in the spark plug and enter the engine causing extensive wear and damage.

Check the gap using a feeler gauge and adjust, if necessary, by carefully bending the ground electrode. See Figure 14. Set the spark plug gap to 0.030 in. (.76 mm).

FeelerGauge

Spark Plug

Ground

Gap

•Reinstall the spark plug into the cylinder head. Torque the spark plug to 28132 ft. lb. (38.0/43.4

N.m).

•Place the spark plug wire boot over the spark plug and press until you feel it "click" in place.

Figure 14

Fuel Filter

whenWARNING:engine is hotDo . not replace the fuel filter

The engine is equipped with an inline fuel filter located on the left side of the engine.

Visually inspect the filter periodically for a build-up of residue inside the filter body, and for a dirty element which can be indicated by discoloration. Replace the fuel filter when dirty.

Cleaningthe EngineAndDeck

Any fuel or oil spilled on the machine should be wiped off promptly.

Do NOT allow debris to accumulate around the cooling fins of the engine or on any other part of the machine, especially the belts and pulleys.

SmartJetTM

Your tractor's deck is equipped with a water port on its surface as part of its deck wash system.

Use the Smart Jet TM to rinse grass clippings from the deck's underside and prevent the buildup of corrosive

chemicals. Complete the following steps AFTER EACH MOWING:

1.Drive the tractor to a level, clear spot on your lawn, near enough for your garden hose to reach.

IMPORTANT:Make certain the tractor's discharge chute is directed AWAY from your house, garage, parked cars, etc.

22

Page 21 Page 23
Page 22
Image 22
Cub Cadet LTI050 manual Cleaningthe EngineAndDeck, Paper ElementTwin Cylinder Engine, SmartJetTM
Page 21 Page 23

LTI050 specifications

The Cub Cadet LTI050 is a standout lawn care solution designed for both residential and commercial users who value efficiency and durability. With its powerful engine and innovative features, this riding lawn mower is built to tackle a variety of terrains while ensuring a high-quality cut.

At the heart of the LTI050 is a robust engine that delivers exceptional performance. Its reliable horsepower allows it to handle tough grass conditions with ease. This makes it suitable for larger lawns and properties where efficiency is key. The engine is designed for fuel efficiency, reducing the need for frequent refueling and providing longer operating times on a single tank.

One of the most notable features of the LTI050 is its cutting deck. The mower comes equipped with a high-performance cutting deck that offers precise results. Available in various cutting widths, it allows users to choose the best size for their mowing needs. The deck is engineered to enhance airflow and grass flow for a superior cut, resulting in a clean lawn appearance.

The Cub Cadet LTI050 also incorporates advanced technology that enhances the user experience. With its easy-to-use control panel, operators can easily adjust the mower settings, including cutting height and speed, with just a few simple steps. The inclusion of a hydrostatic transmission ensures smooth acceleration and deceleration, providing a more enjoyable mowing experience.

Comfort is a top priority in the LTI050 design. It features an ergonomic seat, adjustable steering, and strategically placed controls to minimize operator fatigue during extended use. The overall layout of the controls is intuitive, making it accessible for users of all experience levels.

Durability is another hallmark of the Cub Cadet brand, and the LTI050 is no exception. Constructed with high-quality materials and components, this mower is built to withstand the rigors of regular use. Its rugged frame and reinforced deck ensure it can handle challenging terrains without compromising performance.

Overall, the Cub Cadet LTI050 is a versatile and reliable choice for anyone looking to maintain a pristine lawn. With its high-performance engine, superior cutting technology, and user-friendly design, it represents a perfect blend of power and convenience, making lawn care a more efficient and pleasurable task. Whether for personal use or commercial landscaping, the LTI050 stands out as a top contender in its class.
Top Page Image Contents