TABLE OF CONTENTS

 

TRACTOR PREPARATION

2

IMPORTANT SAFE OPERATION PRACTICES

4

SAFETY DECALS AND LABELS

7

SLOPE GAUGE

8

TO THE OWNER

9

CALLING SERVICE INFORMATION

9

RECORDING MODEL AND SERIAL NUMBER INFORMATION

9

SECTION 1: CONTROLS AND FEATURES

10

SECTION 2: OPERATION

13

SECTION 3: ADJUSTMENTS

20

SECTION 4: MAINTENANCE

21

SECTION 5: MOWER DECK

26

WARRANTY

32

TRACTOR PREPARATION

Remove the upper crating material from the shipping pallet, and cut any bands or tie straps securing the trac- tor to the pallet.

Use the lift handle to raise the deck to its highest posi- tion; engage the transmission bypass rods (Refer to SECTION 1, CONTROLS AND FEATURES); and care- fully roll the tractor off the shipping pallet. Disengage the bypass rods.

Remove the deck wash system nozzle adapter and oil drain tube from the manual bag and store for future use.

INSTALL OPERATOR’S SEAT

4.Align the grooves in the seat adjust spacers with the sides of the adjustment slots in the pivot bracket.

5.Slide the seat adjust spacers into the slots of the pivot bracket.

6.Continue to push the seat forward in the pivot bracket until the front/left shoulder bolt of the seat assembly passes forward of the stop bracket on the seat pivot bracket. See Figure 1.

Use the seat adjust lever to adjust the seat position. Re- fer to "Adjusting the Operator’s Seat" in Section 3 for seat adjustment instructions.

The operator’s seat was partially inserted into the seat pivot bracket for shipping purposes. To install the seat proceed as follows:

1.Cut any straps securing the seat assembly and the drive control levers to the tractor. Remove any packing material.

NOTE: The seat is partially inserted into the slots of the seat pivot bracket. If the seat does not become disen- gaged from the pivot bracket when removing the pack- aging material, the pivot bracket may be pivoted upward and the seat pushed into place as described in step 6. If the seat does disengage the pivot bracket, install the seat as instructed in steps 2 through 6.

2.Pivot the seat pivot bracket partially upward. Refer to Figure 1.

3.Note the grooves in the seat adjust spacers attached to the bottom of the seat, then lift the seat and position above and to the rear of the pivot bracket.

Seat

Adjustment

Seat

 

 

Slots

 

Pivot

 

 

 

 

Bracket

Seat

Adjust

Spacer

Front/Left

 

Seat Adjust

Shoulder Bolt

 

Stop Bracket

Lever

 

Figure 1

2

Page 2
Image 2
Cub Cadet RZT 50 manual Table of Contents, Tractor Preparation

RZT 50 specifications

The Cub Cadet RZT 50 stands out in the world of residential zero-turn mowers, offering a compelling combination of power, performance, and convenience. Designed for homeowners who prioritize both efficiency and lawn care aesthetics, the RZT 50 is an excellent choice for tackling various mowing challenges.

At the heart of the RZT 50 is a robust 24-horsepower Kohler engine. This powerful engine provides ample torque and speed, enabling users to tackle extensive lawns with ease. The mower features a 50-inch cutting deck, which can handle larger areas while maintaining a precise cut. Its unique dual-blade design ensures optimal grass clipping and minimizes the number of passes needed to achieve a well-manicured lawn.

One of the standout features of the RZT 50 is its innovative zero-turn technology. This system allows for exceptional maneuverability, enabling the mower to turn on a dime. This agility proves invaluable when navigating around trees, flower beds, and other landscaping elements, reducing the time and effort required for yard maintenance.

The RZT 50 is equipped with a Cub Cadet Endurance Series engine that enhances durability and reliability. Coupled with a rolled steel frame, this mower is built to withstand the rigors of regular use. The mower’s wide rear tires provide superior traction, allowing it to maintain stability on various terrains, from flat lawns to inclines.

Comfort is not overlooked in the RZT 50’s design. It features a high-back seat and adjustable armrests, enabling the operator to work longer without fatigue. Additionally, the soft-touch controls and easy-to-use dashboard ensure an intuitive mowing experience, even for those new to zero-turn mowers.

Maintenance is simplified with features like the easy-to-access deck washout port, which makes cleaning the mower deck a breeze. Regular upkeep is vital for keeping the mower in top condition, and Cub Cadet has made this process more user-friendly.

All these features come together to make the Cub Cadet RZT 50 a remarkable choice for homeowners. Whether you’re looking to maintain a small yard or manage a larger expanse, this mower combines power, precision, and comfort to deliver excellent results, making lawn care a task that can be completed efficiently and effortlessly.