WARNING! Never operate the mower deck without the chute deflector installed and in the down position.
The discharge chute deflector must be installed before operating the mower.
1.Remove the keys that are attached with a zip tie to the chute bracket.
2.Remove the flange lock nuts from the deck. Do not remove the push nuts or carriage bolts, leaving them in place will aid in installing the chute. See Figure
54” Deck
Shown
Flange Lock Nuts
Push Nuts Carriage Bolts
Figure
3.Install the discharge chute deflector using the carriage bolts, push nuts and flange lock nuts as shown in Figure
54” Deck |
|
Shown | Flange Lock Nuts |
|
To adjust the position of the seat, pull up and hold the seat adjustment lever. Slide the seat forward or rearward to the desired position; then release the adjustment lever. Make sure seat is locked into position before operating the tractor. See Figure
Figure
Discharge | Carriage Bolts | |
Chute | ||
| ||
Deflector |
|
Push Nuts
Figure
Section 2 — Assembly & |
| 11 |
| ||
|
|
|