
OIL CHART
Apply a few drops of SAE engine oil, grease, or use a spray lubricant. Apply the oil to both sides of pivot points. Wipe off any excess. Start engine and operate mower briefly to insure that oil spreads evenly.
Number of Oil Points | Description |
|
|
DAILY |
|
|
|
4 | Deck Suspension Pivots |
4 | Height Adjustment Turnbuckle Clevis Pin |
|
|
2 | Height Adjustment Handle Pivots |
|
|
2 | Height Adjustment Stop Pivots |
2 | Deck Lift Linkage Pivots |
|
|
2 | Transport Handle Pivots |
|
|
1 | Transport Handle Pin |
2 | Deck Frame |
|
|
WEEKLY |
|
|
|
1 | Seat Hinge |
2 | Steering Lever Linkage Rod End Bearings |
|
|
2 | Lever Return Assembly Rod End Bearings |
|
|
2 | Pump Control Lever Pivots |
2 | Grass Collection System Lid Hinges (If Mower is so equipped) |
|
|
LUBRICATION CHART
Use a
Number of Grease Fittings | Description |
EVERY 25 HOURS |
|
|
|
3 | Blade Spindle Bearings |
|
|
WEEKLY |
|
2 | Front Caster Wheels |
|
|
2 | Front Caster Wheel Spindles |
|
|
2 | Mower Deck Ball Wheels |
Number of Grease Points | Description |
|
|
WEEKLY |
|
|
|
4 | Mowing Deck Pivots |
2 | Deck |
|
|
Engine Oil: Rimula 15W40 recommended or 10W40 engine oil rated SJ or higher.
Hydrostatic Fluid: Rimula 15W40 recommended.
Spindle Lubricant: Use only Shell Alvania RL 2 grease. This grease is an
General Purpose Lubrication: Use any NLGI grade 2
22Section 6— Maintenance & Adjustments