Troubleshooting

8

 

 

 

Problem

 

Cause

 

Remedy

 

 

 

 

 

Engine fails to start

1.

PTO/Blade Engage knob engaged.

1.

Place knob in disengaged (OFF) position.

 

2.

Parking brake not engaged.

2.

Engage parking brake.

 

3.

Drive control levers not fully outward in

3.

Move drive control levers fully outward in

 

 

neutral position.

 

neutral position.

 

4.

Spark plug wire(s) disconnected.

4.

Connect wire(s) to spark plug(s).

 

5.

Throttle control lever not in correct starting

5.

Place throttle lever in the fast position.

 

 

position.

 

 

 

6.

Choke not activated.

6.

Pull choke control into full choke position.

 

7.

Fuel tank empty, or stale fuel.

7.

Fill tank with clean, fresh (less than 30 days

 

 

 

 

old) gas.

 

8.

Blocked fuel line.

8.

Clean fuel line and replace fuel filter.

 

9.

Faulty spark plug(s).

9.

Clean, adjust gap or replace plug(s).

 

10. Engine flooded.

10. Crank engine with throttle in FAST position

 

 

 

 

and the choke in the OFF position.

 

 

 

 

 

Engine runs erratic

1.

Tractor running with CHOKE activated.

1.

Push the choke control into the choke off

 

 

 

 

position.

 

2.

Spark plug wire(s) loose.

2.

Connect spark plug wire(s).

 

3.

Blocked fuel line or stale fuel.

3.

Clean fuel line; fill tank with clean, fresh

 

 

 

 

gasoline and replace fuel filter.

 

4.

Vent in gas cap plugged.

4.

Clear vent or replace cap if damaged.

 

5.

Water or dirt in fuel system.

5.

Drain fuel tank. Refill with clean, fresh

 

 

 

 

gasoline.

 

6.

Dirty air cleaner.

6.

Replace air cleaner paper element and clean

 

 

 

 

foam pre-cleaner.

 

 

 

 

 

33