GENERAL SAFETY

OPERATIONS

A.DANGER

1.Do not operate machine in confined areas where exhaust gases can accumulate.

2.Do not operate machine without mower chute deflector in place and operational.

3.Do not carry passengers.

4.This is a narrow track Zero-Turn mower, and it should not be operated on steep slopes. Refer to slope gauge on page 28.

B.WARNING

1.Do not operate machines under the influence of alcohol or drugs.

2.Do not operate machines without all guards and safety devices in place and functional.

3.Do not start machines if there are fuel or oil leaks or spillage — clean it up.

4.Do not operate machines near spilled or leak- ing fuels.

5.Do not stop or park machine over dry leaves, grass, debris, etc. that could be combustible.

6.Use extreme care when backing up.

7.Do not operate machine on slopes greater than 15 degrees (27%).

8.Do not operate machines on slopes when traction is reduced (wet grass, ice, soft ground, loose ground, leaves, pine needles, debris, etc.).

9.Avoid turning downhill if possible, go slowly and use extra care when turning downhill.

10.Do not operate machines during reduce visi- bility (low light, fog, rain, etc.).

11.Do not operate machines with non-approved attachments.

12.Do not operate machines that are dam- aged.....have machine repaired.

13.Do not operate machines that have not been properly maintained.

14.Use only replacement parts that are the same or equivalent to the original equipment.

15.Do not modify machines or any of their com- ponents, especially the engine governor!

16.Do not operate machine for more than 2 hours without hearing protection.

C.CAUTION

1.Use proper protective equipment when oper- ating machine (gloves, boots, and hearing protection are recommended).

2.Read entire machine Operator’s Manual.

3.Make sure operators are fully trained in the safe use of the machine.

4.Follow all safety instructions when using the machine.

5.Keep all safety signs legible and properly installed.

6.Do not check for hydraulic leaks with any part of the body.

7.Do not add fuel to a machine when the engine is running and/or the exhaust system is hot.

8.Keep machine clean and free of debris, grass, leaves, oil, grease, etc.

9.Place lap bars in neutral/start position, set park brake, disengage P.T.O., turn engine off, and remove ignition key before you dismount from machine.

10.Use machines laterally or diagonally across slopes, avoid going downhill when possible.

11.Go slowly and use extra care when descend- ing slopes.

12.Disengage P.T.O. when crossing surfaces such as asphalt, concrete, loose ground, sand, gravel, etc.

13.Use extra care when loading and unloading machines from trucks or trailers.

SAFETY PRECAUTIONS

A.General

1.Read this Operator’s Manual before starting the mower. Study the controls and learn the proper sequence of operation.

2.Do not allow anyone to operate or maintain this machine who has not read this manual. Never permit children to operate this machine.

3.Never carry passengers.

4.Do not remove any shields, guards or safety devices. If a shield, guard or safety device is damaged or does not function, repair or replace it before operating the mower.

5.Always wear safety glasses and safety shoes when operating or maintaining this mower. Do not wear loose-fitting clothing.

6.Disconnect the spark plug wires and remove the key from the ignition to prevent the engine from accidentally starting before performing any maintenance on this mower.

7.Never run the engine indoors without ade- quate ventilation. Exhaust fumes are deadly.

8.To avoid serious burns, do not touch the engine, exhaust pipe or muffler while the engine is running or until it has cooled after it has been shut off.

9.The liquid in the battery is dilute sulfuric acid. Always wear safety glasses and rubber gloves when working on the battery. Do not overfill the battery.

4

Page 4
Image 4
Cub Cadet Z - Wing 48 service manual General Safety Operations, Safety Precautions

Z - Wing 48 specifications

The Cub Cadet Z-Wing 48 is a premium zero-turn mower designed for both professional landscapers and homeowners who take their lawn care seriously. This innovative machine combines power, precision, and efficiency, making it an ideal choice for tackling large areas with ease and speed.

One of the standout features of the Z-Wing 48 is its unique wing-style deck, which allows for a wider cutting path than traditional zero-turn mowers. The mower boasts a versatile 48-inch cutting deck that provides exceptional maneuverability in tight spaces while still delivering a wide cut for larger open areas. This dual capability makes it perfect for navigating around flower beds, trees, and other obstacles while ensuring a consistent, professional finish.

Equipped with a powerful engine, the Cub Cadet Z-Wing 48 delivers reliable performance. Its heavy-duty, high-torque engine provides the necessary power for demanding tasks, ensuring that users can tackle overgrown grass and tough terrain without sacrificing efficiency. The mower also features a robust transmission that offers smooth, responsive control, allowing operators to easily shift between forward and reverse with minimal effort.

In terms of comfort and ergonomics, the Cub Cadet Z-Wing 48 excels. The adjustable high-back seat ensures that operators can work for extended periods without discomfort. The user-friendly control panel is designed for ease of use, providing intuitive controls for speed and steering, as well as quick access to key functions. Additionally, the mower features an advanced suspension system that helps absorb shocks from uneven terrain, leading to a smoother ride.

Technologically, the Z-Wing 48 is equipped with advanced features that enhance its usability. The mower's LED headlights improve visibility during early mornings or late evenings, ensuring a seamless mowing experience regardless of lighting conditions. The model also offers easy-to-access maintenance points, making routine checks and upkeep simpler for users.

Durability is a hallmark of the Cub Cadet Z-Wing 48. Constructed with high-quality materials, this machine is built to withstand the rigors of frequent use, making it a long-term investment for those who demand both performance and longevity. Its corrosion-resistant deck and heavy-duty chassis contribute to its robust build, ensuring it remains in optimal condition for years to come.

In summary, the Cub Cadet Z-Wing 48 stands out with its cutting-edge design, powerful performance, and user-centric features. This mower is perfect for anyone looking to achieve professional-level results while enjoying the benefits of a zero-turn maneuverability, ultimately transforming lawn care into a pleasurable and efficient task.