DCC1200WE-DCC1200E IB 30/11/04 9:49 Page 14
b. Turn off
•Depress the O/I switch (0) and release. The central red indicator light goes off and the appliance stops.
2.To set the time
•Turn the function knob on 
position.
•Press and hold the HRES and MIN buttons to increase the numbers and scroll them at increasing speed. When you get close to the desired number, pulse the push button to increase one digit at a time. When the numbers stop blinking, time is set.
Note: when the number count passes 12, “PM” will be displayed on the LCD to set the time from noon to midnight. When there is no indication, you will set AM times from 0 to noon. Always make sure that the time is set according to the correct period so that the automatic on and off functions operate correctly.
3.AUTO 1,
•Turn the function knob to PROG. The numbers blink.
•Press HRES and MIN to set the desired time to engage the
•Turn the function knob to AUTO 1. The current time is now displayed.
•Lift and release the O/I switch. The green indicator light comes on to signal that the programming function is in use.
•At the programmed time, the central red indicator light will come on with the green light, indicating that the brewing cycle is starting.
•To turn off, depress the O/I switch down and release. The green indicator light (and the red if the brewing cycle has started) goes off.
4.AUTO 0,
•Turn the function knob to AUTO 0. The numbers blink.
•Press HRES and MIN to set the time after which you want the coffeemaker to shut off (from 0 to 4 hours). The numbers blink 5 times then stop.
5. Automatic descaling
Use after use, scaling builds up. Scaling interfers with fine mechanics and gives coffee a hard and bitter taste. That is why the appliance should be regularly descaled to ensure good quality coffee. The descaling frequency depends upon the hardness of your tap water and how often you use the coffemaker.
•When the coffeemaker needs descaling, the descaling indicator light next to the CALC. button begins to flash when the coffee is turned on (see Heading 6. CLEANING AND STORAGE).
•Press the CALC. button and switch on the appliance by flipping the O/I switch up. The descaling indicator light stays on. The coffeemaker is now in “automatic descaling” mode.
•When the cycle is completed, the 5 beeps sound and the coffemaker will shut off.
•A single descaling cycle is generally enough. Switch the coffeemaker on (flip O/I switch up) to see if the descaling light continues to flash. If not, the coffeemaker is descaled. If the indicator light continues to flash, repeat the descaling operation.
•When the appliance is descaled, rinse by running a complete cycle with fresh water: fill the reservoir up to its
maximum level with cold fresh water (without coffee nor
filter). Switch the coffeemaker on (
+ O/I switch) and let water flow.
Note: pressing the descaling button cancels all other settings. If it is pressed accidentally, press it again to cancel descaling and return the coffeemaker to all its previous settings.
6.
Allows to prepare small amounts of coffee (1 to 4 cups) while ensuring optimal temperature.
This function can be combined with all the other settings. Simply press the
13
