Cuisinart PG-26692 Quick Reference PROGRAMMING Guide, Hopper Cleaning Methods, Keeping it Clean

Quick Reference PROGRAMMING Guide

1. To set the Time: Press and hold the Hour or Minute button until the clock begins flashing. Hold down the Hour or Minute button to quickly scroll through the numbers. When desired time approaches, release the button and press repeatedly to advance one digit at a time. To finish, wait for the numbers to stop flashing.

2. To program the Auto-On: Press and hold the Program button until the clock begins flashing. Set the time you want coffee to begin brewing (follow “set the time” instructions). Once complete, press the Program button again. The green indicator light will come on to remind you that the programming function is in use.

At the programmed time, the red On/Off	To start the brew cycle at the same time
indicator light will come on, indicating that	on another day, simply press the Program
3. the brew cycle is starting.	4. button and release. The green Auto-On
	will illuminate.

Keeping it Clean

Permanent filter, filter basket, filter basket cover, carafe and lid.

Wash in warm soapy water and rinse thoroughly or clean in the upper rack of the dishwasher. Dry all parts afterevery use.

Hopper Cleaning Methods:

Remove hopper lid, turn hopper release knob to unlocked position to remove hopper. Set aside unused coffee beans.

Wash hopper and lid with warm, soapy water, rinse thoroughly. Or place hopper and lid on upper rack of dishwasher.

NOTE: Dry all parts thoroughly. Do not add water to unit once the hopper is removed as water

can damage the grinder motor.

Remove any excess ground coffee from the grinder area before placing hopper and lid back on.