USE AND CARE
ASSEMBLY
To use your Cuisinart® Smooth Operator® Blender, begin by assembling the blender jar.
1.Turn the blender jar (a) upside down, and place it flat on a sturdy surface.
2.Position the rubber gasket (b) on the round opening on the bottom of the blender jar.
3. Turn the locking ring with cutting
(c) |
| assembly (c) upside down, and |
| place the blade end in the blender | |
|
| |
|
| jar opening. Engage threads by twist- |
|
| ing the locking ring clockwise until |
|
| tightened. Make sure locking ring is |
(b) |
| tightly fastened to blender jar. Once |
|
| assembled, turn the blender jar |
|
| |
(a) | Note: Blades are sharp… | |
| handle carefully. | |
| 4. | Push the cover onto the top of the |
|
| blender jar. Twist the measured |
|
| pour lid into the cover, or place the |
|
| blending stick into the cover. |
5.Place the blender jar on the motor base so that the handle is positioned to the back of the blender.
6.Screw the dispenser tap or dispenser plug onto the front of the locking ring.
7.Plug in power cord. Your blender is now ready to be used.
HELPFUL REMINDERS
•Once the cover is in position, additional ingredients can be added during blending by simply lifting the measured pour lid, adding ingredients, and replacing the measured pour lid.
•Cover should always be in place while the unit is on.
•Warning: Do not place blender jar onto base while motor is running.
•Do not twist locking ring from blender jar when removing blender jar from base. Simply lift blender jar from motor base.
•Boiling liquid or solid frozen foods (with the exception of ice cubes or
1⁄2 inch [1.3 cm] pieces of frozen fruit) should never be placed in the blender jar.
•Do not place ice, frozen foods or very cold liquids into a blender jar which has come directly from a hot dishwasher.
•Do not place very hot liquids or foods into a blender jar which has come directly from the freezer. Boiling liquids should cool for 5 minutes before being placed in blender jar.
•Follow Cleaning and Maintenance instructions in this booklet prior to your first use.
OPERATION
1.Place the motor base of your Cuisinart® Smooth Operator® Blender on a flat, sturdy surface. It is important that the surface be clean and dry. Assemble the blender by following the assembly instructions. Once the jar is assembled and is in position on the motor base, plug the Cuisinart® Smooth Operator® Blender into an electrical outlet.
2.Add all necessary ingredients to the blender jar, and replace the cover. You may use the blending stick or measured pour lid when blending. The blending stick helps to keep frozen ingredients moving without having to remove the lid. You may add more ingredients by lifting the measured pour lid or blending stick and dropping ingredients through the fill area. Replace the measured pour lid or blending stick after adding ingredients.
Do not place hands into blender jar with blender plugged in.
Note: Add liquid ingredients first, then follow with solid ingredients. This will provide more consistent blending and prevent unnecessary stress on the motor.
Note: To remove blender jar cover, lift edge of cover upwards. Lifting measured pour lid will not remove cover.
3. START BLENDING: Press the ON button. The red LED indicator light will illuminate, indicating that the blender is turned on but no speed has been selected.
4. CHOOSE BLENDING SPEED: Press HIGH or LOW button to determine the speed at
4
