9.Wait until all the water has drained into the brewer before lowering the brewer handle completely.
10.The Brew button LED will remain on, indicating the water is heating.
Note: If Brew button was not pressed before you added water to the water reservoir (Brew and Hot Water LEDs are still flashing) you can do so after water has drained into the brewer and the brewing head is closed. The light will now stay on until heating/brewing is complete.
11.After about 2 minutes, the beverage starts to dispense.
Caution: there is very hot water in the
12.Lift the handle, then remove and dispose of the used
Caution: K-Cup® will be hot.
13.Enjoy your cup of gourmet coffee! Your brewer is ready to use again or you can power it off.
Hot Water
Your brewer is equipped to dispense hot water to make hot chocolate, tea, soup, and more.
To make hot water:
14.Press the Power button.
15.Press the Hot Water button. Add Water indicator will illuminate.
16.Lift the reservoir lid.
17.Pour water into the water reservoir until it reaches up to the rim of your desired fill level on the water level guide (minimum 6 ounces). Close the lid.
18.Lift the brewer handle. Water starts to drain from the water reservoir into the brewer.
19.Place mug on the drip tray. The drip tray can be removed to accommodate travel mugs.
20.Wait until all the water has drained into the brewer before lowering the brewer handle completely.
21.The Hot Water button LED will remain on, indicating the brewer is heating.
Note: If the Hot Water button was not pressed before you added water to the water reservoir (Hot Water and Brew LEDs are still flashing) you can do so after water has drained into the brewer and the brew head is closed. The LED will now stay on until heating/brewing is complete.
22.After about 2 minutes, hot water starts to dispense.
11
