Cuisinart WCH-950C manual storing the unit, technical specifications, Unit, System Capacity

storing the unit	Drainage
1. Turn the unit off and unplug it from outlet.
	Plugs

2. Remove empty water tanks, filter and cover.

3.Allow hot water to cool, then bring base to sink.

4.Drain internal reservoir by tilting unit slightly and removing

the 2 white plastic drainage plugs. Plugs are tightly inserted and must be gently, but firmly, worked to remove.

5.When water has completely drained, replace plugs, tanks, filter and cover.

6.Your Cuisinart Countertop Filtration System is ready to store.

technical specifications

Unit:
WCH-950C	1	Cuisinart®
		Countertop Filtration System
	1	Cuisinart® Water Filter
System Capacity	up to 3-4 months/ 80 gallons/ 302 liters
Maximum Temperature	194°F (90°C)
Minimum Temperature	44.6°F (7°C)
Rated Service Flow	10 gallons / 37.85 liters per day
	(may vary according to water conditions)

System Tested and Certified by NSF International against NSF/ANSI Standard 53 for the reduction of Benzene, Cadmium, Copper, Mercury, Tetrachloroethylene, Toluene, and Standard 42 for the reduction of Chlorine Taste and Odour.

See Performance Data Sheet for specific test conditions and results.

Claims are calculated based on NSF accepted practice of average percent reduction. The contaminants or other substances removed or reduced by this water treatment device are not necessarily in all users’ water. Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Individuals requiring water of specific microbiological purity should consult their physician.

The Cuisinart® Countertop Filtration System processes approximately

80 gallons/ 302 liters. When the Cuisinart® Water Filter (GF-80C) exceeds filtering capacity, replacement is essential for the product to perform as represented. Replacement filters may be purchased at most retail outlets. The performance of the filter may vary based on local water conditions.

Hot water should not be used with the Cuisinart® Water Filter (GF-80C) as it will affect the filter’s performance.

Refer to the Operating Instructions and Cleaning and Care for general unit operation and maintenance requirements. Testing was performed under standard laboratory conditions; actual performance may vary.